Advertisement

cooking collection
Instructions for use and warranty details
Gas Cooktop
Model No.: KCGCT9011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KCGCT9011 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kleenmaid KCGCT9011

  • Page 1 Instructions for use and warranty details Gas Cooktop Model No.: KCGCT9011...
  • Page 2 Correct installation will avoid delays and unnecessary service call costs. Once installation is complete, please read this instruction manual carefully and get to know the controls and the features of your new Kleenmaid appliance. These simple instructions will enable you to achieve excellent results from the very first time you use it.
  • Page 3 BUILT-IN GAS COOKTOP  USERS OPERATING INSTRUCTIONS  INSTALLATION ADVICE IMPORTANT - PLEASE READ AND FOLLOW  Before using this appliance please read these instructions carefully.  Do not remove permanently affixed labels, warnings, or plates from the product. This may invalidate the warranty.
  • Page 4: User Instruction

    USER INSTRUCTION IMPORTANT PRECAUTIONS AND RECOMMENDATIONS  After having unpacked the appliance, check to ensure that it is not damaged. If you have any doubts, do not use it and consult your supplier or a qualified technician.  Packing materials (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not be left around within easy reach of children, as these may cause serious injuries.
  • Page 5 FEATURES KCGCT9011 5 burner L860mm x W510mm Fig.1.1 Note: -The electric gas-lighting device is incorporated into the knobs. COOKING POINTS CAUTION: If the burner flames are accidentally extinguished, turn the gas off at the control 1.Auxiliary(A) knob and wait at least 1 minute before attempting to relight.
  • Page 6: Using The Gas Cooktop

    USING THE GAS COOKTOP GAS BURNERS Gas flow to the burners are adjusted by turning the knobs (illustrated in (fig.2.1) which control the valves. Turning thek nobs ot h att h e indicator l inep oints to thes ymbols printed ont h e panel achieves to following functions: =closed valve =maximumr a te...
  • Page 7: Cleaning And Maintenance

     CLEANING AND MAINTENANCE GENERAL RECOMANDATION  Before you begin cleaning you must ensure that the hob is switched off. It is advisable to clean when the appliance is cold. Do not use steam jet cleaners  All enamel surfaces have to be washed with soapy water or some because the humidity could other non-abrasive product with a sponge and are to be dried preferably enter into the appliance...
  • Page 8 CORRECT REPLACEMENT OF THE BURNERS It is very important to check that the burner flame spreader "F" and the cap "C" have been correctly positioned (see figs. 3.1 and 3.2). Failure to do so can cause serious problems. In appliances with electric ignition check that the electrode "S"...
  • Page 9: Installation Instructions

    INSTALLATION INSTRUCTIONS W ARNING! THIS APPLIANCE HAS TO BE INSTALLED BY A QUALIFIED INSTALLER. Improper installation, adjustments, alterations, service or maintenance can cause injury or property damage. Consult a qualified installer, service agent, or the gas supplier. - The appliance is not suitable for connection with a hose assembly. special conditions which must be avoided e.g.
  • Page 10 GENERAL INFORMATION 11. Air Supply and Ventilation 1. Installation must conform with local codes or in The installer must refer to local/national codes the absence of local codes, with the National Fuel Gas Code, AS 5601 provides essential requirements 12.Gas Manifold Pressure and basic standards for gas installations Natural gas - 1.0 kpa 2.
  • Page 11 ④ INSTALLATION INTO THE CABINET Please take the cut-out size according to the cooktop dimension. The ins ruction sh ll contain t e statement: DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE STORAGE DRAWER OR THIS APPLIANCE DO NOT USE SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
  • Page 12 PROXIMITY TO SIDE CABINETS Important: Base cabinet construction must allow for size of cooktop cut-out. 1. Gas line opening: Wall-anywhere 300mm(11” 51/64)below underside of countertop; Cabinet floor – anywhere 79.2mm(3”1/8) from the rear wall. Grounded outlet: the electric cord with 3-prong ground plug has a length of 122mm(48”).Grounded outlet should be located within 914.4mm (36”) of right rear corner of cut-out.
  • Page 13: Gas Connections

    ⑤ GAS CONNECTIONS All gas connections must be made according to national and local codes. This gas supply (service) line must be the same size or greater than the inlet line of the appliance. Sealant on all pipe joints must be resistant to the action of LP/Propane gas.
  • Page 14 GAS CONNECTION SPECIFICATION...
  • Page 15 b) Any conversion required must be performed a qualified licensed gas service company. Please provide the service person with this manual before work is started on the cooktop. (Gas conversions are the responsibility of the dealer or end user.) c) This cooktop can be used with NATURAL or LPG/PROPANE gas. It is shipped from the factory adjusted for use with LPG gas.
  • Page 16 CONVERSION TO LP/PROPANE GAS Every cooktop is provided with a set of injectors for the various types of gas. Select the injectors to be replaced according to the table below. The nozzle diameters, expressed in hundredths of a millimeter, are marked on the body of each injector. ) @ .
  • Page 17 OPERATIONS TO BE PERFORMED WHEN SUBSTITUTING THE INJECTORS  Remove the gratings, the burner covers and the knobs;  Using a wrench substitute the nozzle injectors “J”(fig:5.4-5.5) With those most suitable for the kind of gas for which it is to Be used.
  • Page 18: Electrical Connection

    ⑥ ELECTRICAL CONNECTION If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate. Check with a qualified electrician if you are not sure whether the cooktop is properly grounded.
  • Page 19 WIRING DIAGRAM IGNITION WIRING DIAGRAM IGNITION AND REIGNITER...
  • Page 20 Australian Consumer Law. c. In the event that a request for repair is made against this Kleenmaid Warranty where the serial number for the Product cannot be verified or you cannot produce for verification a proof of purchase for the Product (including but not limited to the original invoice), the repairer will not carry out any repairs on the Product and you will be charged a service call-out fee.
  • Page 21 13. Kleenmaid accepts no liability for items that are lost, damaged, or stolen as a result of freight, transport or storage. If you are required to transport the Product to an authorised service centre, you must ensure that it is securely packed and insured.
  • Page 24 Other products available in the Kleenmaid range of appliances Washing machines Clothes dryers Dishwashers Ovens Cooktops Steam ovens Microwave ovens Built in espresso coffee machines Rangehoods Freestanding ovens Compass Capital Services Pty Limited trading as Kleenmaid ABN 96138214525 Level 2, 204 Botany Road Alexandria NSW 2015 E: support@kleenmaid.com.au...

Table of Contents