Page 1
DWR-920PW T4 4G FLLA PHONE Firmware Update Tools required for phone update: 1x PC or laptop running on Windows 1x USB cable (USB to micro USB) – Picture reference below 1) Download the phone update tool package Link to the phone update tool and firmware: http://downloads.d-link.co.za/DWR/dwr920PW/firmware/...
Page 2
2) Extract/Unzip all files to the same folder 3) Select SPRD_NPI_USBDriver_1.4 and run the installation file depending on the system format (32bit or 64bit). Windows will prompt you if you have selected the incorrect format. Select the other installation file if you encounter the message. Follow the instructions on screen and click “Finish”.
Page 3
6) Start the program (the program can take about 30s to 2min to open). You will be presented with the below program screen. Press the Gear icon as indicated by the arrow 7) We will now load the update file. Select the .PAC file and click “Open”. Below we will use DWR-920PW-T4_001.1pac for example Page | 3...
Page 4
Once the packet file has been loaded, your program screen will look like the below. Press the Play button as indicated by the arrow below. The Play button will turn grey to show it is now running. 9) For the next step, make sure the phone is POWERED OFF and the Battery and power adapter is removed.
Page 5
12) The phone will now boot up by itself. You might see the below screen indicating the USB is connected to the pc. You can now insert the battery back into the phone and plug in the power adapter. Unplug the USB cable from the phone. 13) To close the program, press the stop icon then close the program.
Need help?
Do you have a question about the DWR-920PW and is the answer not in the manual?
Questions and answers