Loading The Washer - Haier XQJ100-96A - 09-01 User Manual

XQJ100-96A manual 10/22/01
English
Reset Mode:
• If you need additional water, turn the knob to the RESET position.
Hold it until you have the amount of water you need. Once done,
return to your original load size setting.
Warning: If you hold the RESET knob for an extended periods while the washer is
running then it will cause washer to overflow.

Loading the Washer:

• Load each item loosely.
• Separate the white and colored clothes. Separate heavy clothes from
light clothes.
• Carefully check all pockets and cuffs for small items.
They can easily slide in to the tub and may damage the tub.
• Pre-treat all stains and heavily soiled areas for best results.
• Do not overload your washer.
• When loading wet items, keep water level high enough so items
can float easily in the water.
• Avoid wrapping large items such as bed sheets around the agitator.
• Close the door properly after loading the clothes. If you keep the lid
up, the agitation will not start.
7
11:30 AM Page 8