Resetting To The Factory Presets - Yamaha MCX-C15P Owner's Manual

Distributed audio controller
Table of Contents

Advertisement

00_MCX-C15_Owner_UB.book Page 52 Tuesday, April 20, 2004 9:32 PM
SYSTEM SETTINGS
Resetting to the factory
presets
If you want to reset all of your client's parameters
for any reason, do the following. This procedure
resets ALL parameters, including the FAVORITES
buttons, etc. This procedure should be performed in
the following situations only:
When your client appears to be functioning
incorrectly for no apparent reason, and reference
to "TROUBLESHOOTING" (page 55) is of no
assistance.
When you have made multiple mistakes in
setting the parameters on your client and wish to
start again.
When you wish to reset the client completely for
use in a different MusicCAST network.
CAUTIONS
Resetting the client to its default settings
will not reverse any updates to the
firmware, or erase any data stored on
your MusicCAST network.
Because this procedure resets all of the
client's parameters to their initial
settings, you need to set them again after
performing the reset procedure.
Note that when resetting all parameters,
the client also resets its network
parameters, and disconnects itself from
your MusicCAST network.
MCX-3 WD01440
LIBRARY
MUTE
FAVORITES
1
2
SELECT
1
PLAY
MENU
INFO.
PAUSE
1
STOP
4
GROUP
PLAY
7
5
OFF TIMER ON TIMER
52
VOL
3
4
2-4
BOOKMARK
INPUT
RANDOM
2
3
REPEAT
5
6
GROUP
RECALL
S
1
Press and hold MENU until the Top
Menu screen is displayed.
2
Press u / d to choose "Setup" and
press SELECT.
Top Menu
Edit Bookmark
Setup
3
Press u / d to choose "System" and
press SELECT.
Setup
Network
System
4
Press u / d to choose "System Reset"
and press SELECT.
System
System Update
System Reset
5
Press p to begin the resetting process.
Press PLAY to restore
to factory setting.
To cancel without resetting, press j .
6
The client automatically switches itself
off and then on again.
The resetting process is complete.
Note
You cannot reset the client to the factory presets if it
is locked from the server. See "To unlock a client
from the server" (page 53).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcx-c15

Table of Contents