Factory Set (Restore Factory Defaults); Restoring The Factory Defaults - Yamaha MagicStomp Owner's Manual

Factory Set
I Restoring the factory defaults
Hold down both the ON/OFF switch and [STORE] button then plug in the power adaptor connected
to the unit, and "FACTORY SET" will appear in the display.
Press the + switch and the display will ask for your confirmation.
* Pressing the – switch cancels the Factory Set operation and the MAGICSTOMP will start normal operation.
Press the [STORE] button to execute the Factory Set operation. All settings in the User Patch memory
will be overwritten with factory default settings, which are the same as the Preset Patches.
* Press either the –, + or ON/OFF switch to cancel the factory set operation, and the MAGICSTOMP will start
normal operation.
When you restore the factory default settings, all data for the current settings in
the User Patch memory will be lost. We recommend that you make a note of, or
back up to a computer, any important data or settings.
(Restore Factory Defaults)
00FACTORY00SET00
0NO:[-]0YES:[+]
00FACTORY00SET00
SURE?PUSH[STORE]
21