Table of Contents
Advertisement
00_MCX-C15_Owner_UB.book Page 48 Tuesday, April 20, 2004 9:32 PM
SYSTEM OPTIONS
4
Press u / d to choose "Variable" or
"Fixed" and press SELECT.
AUDIO OUT
Variable
Fixed
Variable
Controls the playback volume and
tone using the client settings.
Fixed
Controls the playback volume and
tone using the external component
settings. In this case, you cannot
control the playback volume and
tone using the client.
Notes
• Depending on the settings of the external
component you are using, this function may not
work as described above.
• If "Fixed" is selected in step 4, the volume output
level of your client is set to maximum. In this case,
adjust the volume level on the connected
component before starting playback.
48
Sleep mode
If you will not be using your client for an extended
period, you can place it in sleep mode. Power
consumption is reduced in sleep mode, but the client
still consumes a small amount of power to keep the
display and remote control signal receiver in
operation.
MCX-3 WD01440
LIBRARY
VOL
MUTE
FAVORITES
1
2
3
4
SELECT
BOOKMARK
PLAY
MENU
INPUT
INFO.
PAUSE
RANDOM
1
2
3
STOP
REPEAT
4
5
6
GROUP
PLAY
GROUP
RECALL
7
S
OFF TIMER ON TIMER
Press
.
The message "Please wait." is displayed and the
client switches to sleep mode.
The current time appears in the display.
Please wait.
y
To display the time correctly, check the server
connections, or change the time display setting on
the server as follows:
Press u / d to choose "System Setup" - "Date/
Time" - "Time Display", then choose "24 hours" or
"12 hours (AM/PM)", and press SELECT. Press
u / d / j / i to choose "OK" and press SELECT.
Note
The client automatically switches to sleep mode if
no operation is performed for 30 minutes.
button
PM
Advertisement
Table of Contents
