Teac PD-D2410 Owner's Manual page 20

A
STOP
B
C
DISC NO.
TRACK NO.
STOP
D
STOP
20
PROGRAM
CHECK
PROGRAM
CHECK
PROGRAM
CLEAR
Program Playback 2
A
Checking the programmed contents
The programmed contents can be checked easily using the
PROGRAM CHECK button.
1. Press the STOP button (H).
2. Press the PROGRAM CHECK button.
Each time the PROGRAM CHECK button is pressed, the track
number and DISC number appear in the programmed order.
B
Changing a program
1. Display the selection to be changed by pressing the
PROGRAM CHECK button.
2. Enter a new program selection.
C
Adding selections to a program
1. To add new selections to a program after programming, first
press the STOP button (H).
2. Select the DISC/TRACK number.
3. Press the PROGRAM button.
D Ending programmed play
1. Press the STOP button (H) to end programmed play.
2. Press the CLEAR button to clear the program memory.
The PROGRAM indicator goes off.
< During programmed play, if the CLEAR button is pressed,
programmed play ends and normal play continues from that
point.
< The program memory is also cleared if the CD changer's
power is switched off.
Notes:
< Track numbers which exceed the highest track on a disc can
be programmed, but during play these tracks will be deleted.
< The time shown in the display may differ slightly from the time
listed in the literature from the compact disc.
ENGLISH