Table of Contents
Advertisement
IP Address - The IP address of the selected unit.
Subnet mask - The Subnet mask of the selected unit.
Default gateway - The default gateway of the selected unit.
DHCP - Sets the way your system utilizes the Dynamic Host
Configuration Protocol (DHCP, used for automatic IP assignment).
Always - The system searches for a DHCP server each time the unit
is turned on.
Smart - The system searches for a DHCP server only if no IP
address was assigned. If an IP address was assigned manually, the
system will not search for a DHCP server.
Never - The system never searches for a DHCP server.
The default value is Smart.
NOTE: When the unit is configured to use a DHCP server and none exists, the unit will
assign itself an automatic class B address in the range 169.254.X.X; this can be
used with Auto Discovery when the MAC address is not available.
Figure 12: IP Parameters Tab
25
Advertisement
Table of Contents
