Line Splitter - D-Link DSL-510 User Manual

Line Splitter

If you are instructed to use a "line splitter", you must install the device between the Router and the phone jack. Use
standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall
jack, the Router and if desired, a telephone or telephone device.
The connection ports are typically labeled as follows:
Line - This port connects to the wall jack.
ADSL – This port connects to the Router.
Phone – This port connects to a telephone or other telephone device.
This diagram illustrates how a line splitter should be installed.
DSL-510 ADSL Router User's Guide
Split Line Filter Installation
74