HOUSING The camera probe is not made of heat-resistant and high-temperature materials. When checking 01 Probe socket the engine of, for example, a car, please ensure 02 Power button the temperature in the engine drops to the nor- 03 Settings button mal temperature.
Page 4
· Insert the USB-C connector to the USB-C socket · If you like to save pictures/videos, insert an [10] of the device. Micro SD card in the Micro SD-slot [13] when the device is shut down. This device does not support fast charging. NOTE Please pay attention to whether the insert direc- If the device is not used for a long time, please...
CHANGING CAMERA · Move the camera to the place you want to The Tubecorder 5.5 HD Dual comes with a frame. 5-meter-long probe with two cameras. One · Press the Register/Record button [06] to start camera is located at the front of the probe (front recording a video.
· In case of a video, you can start the playback by - Restart the device, or reconnect the probe to holding the Playback-button [04]. the device. · Use the Fast Forward button [07] to speed up The device crashes the playback speed.
2 Megapixel DECLARATION OF CONFORMITY Viewing angle 78° Focal range 20-100 mm (front camera) Futech (Belgium) declares under its own responsibility that 20-50 mm (side camera) this device: Screen 5.0 inch color display - 650.522 Tubecorder 5.5 HD Dual is in conformity with the standards...
Page 8
USER MANUAL other languages: DANSK ITALIANO DEUTSCH NEDERLANDS ESPAÑOL NORSK EESTI KEEL PORTUGUÊS SUOMEN KIELI SL SLOVENŠČINA FRANÇAIS SVENSKA ÍSLENSKA Facebook @futechtools LinkedIn futechtools World Wide Web futech-tools.com YouTube @futechtools...
Need help?
Do you have a question about the TUBECORDER 5.5 HD DUAL and is the answer not in the manual?
Questions and answers