Turn The Power On - Elecom M-XGS50MBSK Series User Manual

It will take approximately 5 hours until full charge.
If the LED light does not stop blinking even after the prescribed charging time,
remove the charging USB cable and stop charging for the moment. Otherwise,
this can cause overheating, rupturing or fires.
2.

Turn the power ON

1) Slide the power switch on the underside of the product to the ON position.
The LED light will light up for a period of time.
* When the battery level is running low, the LED light will blink for a period of time.
Power-saving mode
When the mouse is left untouched for a fixed period of time while the power is ON,
it automatically shifts to power-saving mode.
The mouse returns from power-saving mode when it is moved.
* Mouse operation may be unstable for 2-3 seconds after returning from the
power-saving mode.
3.
Pairing with a PC