Table of Contents
Advertisement
Router Configuration
All the settings that define Router operations on both the LAN and WAN can be configured with the menus
located in the Configuration folder. These menus are described in the first part of this chapter presented in the
same order that they appear in your browser.
The Maintenance folder and Summary folder contain menus useful for system upkeep and analysis. These
menus are described later in this chapter.
The first menu presented when you login is the Router/Bridge Configuration menu used to configure settings for
the WAN connection.
Router/Bridge Configuration
Use the Router/Bridge Configuration menu to configure the WAN connection. The WAN connection must have
the correct Connection Profile including accurate VPI and VCI values. For PPPoA and PPPoE Connection
Profiles you must also supply user account information (User Name and Password) to access the service
provider's network. This is NOT the same as the System User Name and Password used to access the web
manager of the Router. See the table below for a complete description of the various configurable parameters in
the Router/Bridge Configuration menu. Auto-refresh may be disabled to prevent the PPP Information from
displaying updates.
DSL-1500G SHDSL Ethernet Router User's Guide
Router/Bridge Configuration
NOTE: If the Connection Profile is changed to Router with RFC 1483, Bridge
with RFC 1483 or Router with IPoA, the Router/Bridge Configuration menu will
be changed after the configuration settings are saved and the device is
restarted.
15
Advertisement
Table of Contents
