Siebert SX502 Series Faq

FAQ – configuration profinet example for series SX502
Safety precautions
Important Information
Safety
Intended use
Mounting and Installation
FAQ - configuration sx502 profinet example
Author: Achim Baumann
Read these operating instructions before starting the unit. They
provide you with important information on the use, safety and
maintenance of the units. This helps you to protect yourself and
prevent damage to the unit.
Information intended to help you to avoid death, bodily harm or
considerable damage to property are highlighted by the waring
Triangle shown here; it is imperative that this information be
properly heeded.
components inside the units are energized with electricity during
operation. For this reason, mounting and maintenance work may
only be performed by professionally-trained personnel while
observing the corresponding safety regulations.
The units do not have a power switch. They are operative as
soon as the operating voltage is applied.
The units are intended for use in industrial environments. They
may only be operated within the limit values stipulated by the
technical data.
When configuring, installing, maintaining and testing the units,
the safety and accident-preventation regulations relevant to use
in each individual case must be comlied with.
Trouble-free, safe operation of the units requires proper
transport, storage, installation, mounting and careful operation
and maintenance of the units.
The attachment options for the units were conceived in such a
way as to ensure safe, reliable mounting.
The user must ensure that the attechment hardware, the unit
carrier and the anchoring at the unit carrier are sufficient to
securely support the unit under the given surrounding conditions.
The units are to be mounted in such a way that they can be
opened up while mounted. Sufficient space for the cables must
be available in the unit near the cable infeed.
Sufficient space is to be kept clear around the units to ensure air
circulation and to prevent the biuld-up of heat resulting from use.
The relevant information must be heeded in the case of units
ventilated by other means.
23.01.2013 Seite 1/13