Setup; Help - Tokenworks IDVisor Smart V2 User Manual

IDVisor Smart V2 User Guide

3.4 Setup

Tapping the Setup button will display a menu of functions that are typically used by a system
administrator. These functions can be protected by pin codes to keep settings and information
secure. The unit comes with a pre-initialized pin code (5678) for the following functions: Data-
base, Configuration, and Tag List.
The details of each of the buttons in the Setup menu are outlined in the

3.5 Help

Tapping the Help button will display a menu for viewing short instructions that describe
operations of the ID Scanner. Tap any of the 6 menu items to view the instructions for that
operation.
Check for Updates will check if there are any new updates for the ID Smart V2 software. A
Wi-Fi connection is required to check for updates.
Setup Menu
Help Menu
Page 10 of 28
Setup Menu section.
Rev 6.1 - December 15, 2020