Related Manuals for Tokenworks IDVisor Touch
Summary of Contents for Tokenworks IDVisor Touch
- Page 1 ® IDVisor Touch Quick Start Guide Contents of the 1.) ID Scanner 2.) USB Cable 3.) Power Cable...
- Page 2 Step 1 Step 1 Turn on Scanner Head Push internal button on side of case with Stylus. Green Ready LED should light on Scanner and listen for triple beep. Note: Do Not Switch Off in normal use. Just plug unit into wall outlet at end of night.
- Page 3 Step 3 –License Data Stripe Technology The IDVisor Touch ID Scanner Reads 2D Bar Codes and Magnetic Stripes. This section explains how to recognize which is on the drivers license If a license has both, we suggest you scan the 2D Bar code first and the magnetic stripe to verify the information on the screen is the same from both scans.
- Page 4 Step 4 Scan or Swipe License 2D Barcode Scanning For states like NY with 2D bar code and Military IDs, insert bar code with bar code facing computer screen into slot as shown. Display will update information – see cross check data section below Magnetic Stripe Swiping For states like California...
- Page 5 Step 5 – Connect to Charger At the end of the night, or whenever the unit is near the charger, it should be connected to the charger. Only use supplied 12V 1A power supply. The LED will turn when charging GREEN when fully charged.
- Page 6 System Reset Do the following if Scanner Does Not Work 1.) Connect to Power 2.) Wait 10 Minutes for Batteries to Charge 3.) Press and Hold Computer Power 4.) Perform Soft Reset Switch Until Computer Turns On (Computer will Vibrate) After Step 4, system will reboot and pressing “Scan IDs”...
- Page 7 Checking IDs TokenWorks provides the IDvisor ID scanner to automate and document the ID checking process for purchasing age sensitive products (Tobacco/Alcohol). The number one cause for citations, according to enforcement officers, is mental errors such as failing to check an ID or making a math error when calculating the age from the date of birth.
- Page 8 Cross Check Data Always cross check the data displayed on the scanner versus what is shown on the front of the ID. Some fake IDs have a 'cloned' or copied data stripe from another person who is over 21 years old. The "F.E.A.R."...
Need help?
Do you have a question about the IDVisor Touch and is the answer not in the manual?
Questions and answers