Page 1
® IDVisor Mobile Quick Start Guide Turn Bar Code / Magnetic Stripe Scanner on by pushing Red button – Green Ready LED should light on Scanner and listen for triple beep. When unit is not in use, turn off scanner to save battery life Press White button with...
Page 2
The IDVisor ID Scanner Reads 2D Bar Codes and Magnetic Stripes. If a license has both, we suggest you scan the 2D Bar code first and the magnetic stripe to verify the information on the screen is the same from both scans. The scanner is designed Not to read the 1D Bar Code as it has no name/address information.
Page 3
For states like NY with 2D bar code, insert bar code with bar code facing computer screen into slot as shown. Display will update information – see cross check data section below For states like Ohio with a Magnetic Stripe, swipe license with magnetic stripe facing...
Page 4
At the end of the night, charge unit by using supplied power supply as shown on right. LED next to power jack will turn when charging GREEN when fully charged. It takes about 4 hours to fully charge. Charging Procedure Soft Reset Procedure –...
Page 5
Checking IDs TokenWorks provides the IDvisor ID scanner to automate and document the ID checking process for purchasing age sensitive products (Tobacco/Alcohol). The number one cause for citations, according to enforcement officers, is mental errors such as failing to check an ID or making a math error when calculating the age from the date of birth.
Page 6
Cross Check Data Always cross check the data displayed on the scanner versus what is shown on the front of the ID. Some fake IDs have a 'cloned' or copied data stripe from another person who is over 21 years old. The "F.E.A.R."...
Need help?
Do you have a question about the IDVisor Mobile and is the answer not in the manual?
Questions and answers