Newly added bulk dump data types
(from V1.05)
The following data types can now be handled by bulk dump.
Data name
Data Number
(D0)
(D1,2)
512
'K'
(Current Data)
512-
'V'
(Current Data)
512-
'L'
(Current Data)
512-
'U'
(Current Data)
SETUP data compatibility (from V1.05)
SETUP data created on system software V1.05 or later can-
not be loaded into a system that's running V1.03 or earlier.
However, SETUP data created on system software V1.03 or
earlier can be loaded by a system that's running V1.05 or
later.
Scene data compatibility (from V1.10)
In conjunction with Y96K card support, compatibility of
scene data (ALL DATA, SCENE MEMORY, SCENE MEM-
ORY with LINKED LIBRARY) has been changed as follows.
Scene data created with system software V1.10 or later can-
not be loaded into a system running V1.04 or earlier.
However, scene data created on a system running V1.04 or
earlier can be loaded into a system running V1.10 or later.
In this case, the Y96K settings will remain as they were prior
to loading. If you save this data on a system running V1.10
or later, the data size will increase by the amount required
for Y96K support.
A note regarding scenes/libraries imme-
diately after system startup
After the system is started up, the PM5D takes several min-
utes to transfer scene/library data within internal memory.
(The time required depends on the amount of data.) This
means that the following restrictions apply during this time.
• You can't execute the PASTE button in the GLOBAL
PASTE screen.
• You can't execute the scene memory UNDO function.
• Scene memory recall will take a bit of time.
Support for Studio Manager (PM5D Edi-
tor) (from V1.10)
Now you can use the included Studio Manager application
software to control the PM5D. For details on Studio Man-
ager, refer to the Studio Manager installation guide.
tx/rx
Function
Surround Setting
tx/rx
& Request
User Defined Keys
tx/rx
& Request
MIDI Remote &
tx/rx
Request
Fader Mode &
tx/rx
Request