Yamaha Audiogram3 Owner's Manual page 12

Quick Guide
5
Select [ASIO DirectX Full Duplex Driver](Windows), [USB Audio CODEC](Mac) in the
[Devices] field on the left side of the Device Setup window, and click [Control Panel] on
the right side of the window.
Windows:
The ASIO Direct Sound Full Duplex Setup dialog box will be displayed. Check only the input port and
output port [USB Audio CODEC] checkbox, and then click [OK] to close the dialog window.
Mac:
The [CoreAudio Device Settings] dialog window appears. Check only the [USB Audio CODEC]
checkbox in both "Input" and "Output" of the [Input/Output Configuration] field. Click [Close] to close
the dialog window.
6
Make sure that "USB Audio CODEC 1/2"(Windows), "Front Left/Front Right" (Mac) are
shown in the [Port System Name] field, and check the [Visible] column in the Device
Setup window. Click [OK] to close the window.
If the [Port System Name] field does not change, close and restart the Cubase AI, then open
NOTE
the Device Setup window.
12
AUDIOGRAM 3 Owner's Manual