Horizontal Banding; Vertical Misalignment; Banding - Epson Disc producer PP-100III User Manual

Horizontal Banding

Make sure the printable side of the disc is face up in the stacker.
Run the head cleaning utility to clear any clogged ink nozzles.
& See "Cleaning the Print Head" on page 132.
Use ink cartridges within six months after opening the packages.
Use genuine Epson ink cartridges.
Check the H Ink light. If the light is on, replace the appropriate ink cartridge.
& See "Replacing an Ink Cartridge" on page 127.
Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See "Publishing Discs" on page 24.

Vertical Misalignment

Run the print head alignment utility.
& See "Aligning the Print Head" on page 135.
Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See "Publishing Discs" on page 24.

Banding

Make sure the printable side of the disc is face up in the stacker.
Run the head cleaning utility to clear any clogged ink nozzles.
& See "Cleaning the Print Head" on page 132.
Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See "Publishing Discs" on page 24.
Due to the variation in the quality of discs, print results using the same type of discs from the
same data may not be the same.
Troubleshooting 162