D-Link DVG-2032S User Manual page 16

PPPoE Account Settings
After entering IVR mode, dial 121.
After hearing "Enter value", enter the account number, followed by "#".
Example: If the account is "84943122 @ hinet.net", please enter 08 04 09 04 03 01 02 02 71 48 49 54 45 60
72 54 45 60 #.
Please note that it is necessary to enter two digits for each character/number; for example,
enter "01" for "1" and "11" for "A".
PPPoE Password Setting
After entering IVR mode, dial 122 after hearing "enter value" followed by "#".
Example: If the password is "3ttixike", please enter "03 60 60 49 64 49 51 45#".
Save Settings and Restart
To save settings, dial 509 (Save Settings). The system will save the settings. Please restart the
system. Wait for about 40 seconds for the system to restart, and then enter 101 to check if the IP
address is retained. If the IP address is not repeated, it indicates that Gateway has not been
properly connected, please check if the cable connection, account, or password are correct.