National Public Seating COLLABORATOR CLT3072D2BB Assembly Instructions

TABLE COMPONENTS
1
Fasten each end of the Crossbeam
to each Leg
included Bolts
at the center of each Leg and into
the ends of the Crossbeam.
C
B
Double check all Screws and Bolts to be tightened securely before use. Check all
Screws and Bolts periodically. Failure to completely tighten the Screws and Bolts
may result in tipping and possible injury!
Congratulations, your
Dear Customer, Thank you for your purchase. Although extreme care goes into manufacturing &
packaging of this product, mistakes are possible. If you encounter any missing parts or di culty in
assembly, please contact our customer service Toll Free at 1-800-261-4112 or
info@nationalpublicseating.com for courteous & immediate resolution to your problem.
ASSEMBLY INSTRUCTIONS
COLLABORATOR TABLE WITH CROSSBEAM
by installing two
B
2 through the holes
2
COLLABORATOR TABLE WITH CROSSBEAM
is now assembled and ready to be used!
A Tabletop
2x Legs
B
Crossbeam
C
2
Align the Leg Top Plates
C
pre-marked holes on the Tabletop
and fasten Legs
installing nine Screws
each Top Plate into the Tabletop.
B1
INCLUDED HARDWARE
1
36x Screws
TOOLS FOR ASSEMBLY
3 4
Drill Allen Wrench
to Tabletop by
B
B
1
A
2
4x Bolts
with the
B1
A
through
1