Advertisement
ASSEMBLY INSTRUCTIONS
GSL SERIES | THE GREYSTONE LECTERN
ASSEMBLY MANUAL
Dear Customer, Thank you for your purchase. Although extreme care goes into manufacturing & packaging of this product,
mistakes are possible. If you encounter any missing parts or di culty in assembly, please contact our customer service
Toll Free at 1-800-261-4112 or info@nationalpublicseating.com for courteous & immediate resolution to your problem.
Page 1 of 10
www.nationalpublicseating.com
1-800-261-4112
Advertisement
Table of Contents
Related Manuals for National Public Seating Oklahoma Sound GSL Series
Summary of Contents for National Public Seating Oklahoma Sound GSL Series
- Page 1 ASSEMBLY INSTRUCTIONS GSL SERIES | THE GREYSTONE LECTERN ASSEMBLY MANUAL Dear Customer, Thank you for your purchase. Although extreme care goes into manufacturing & packaging of this product, mistakes are possible. If you encounter any missing parts or di culty in assembly, please contact our customer service Toll Free at 1-800-261-4112 or info@nationalpublicseating.com for courteous &...
-
Page 2: Assembly Tips
ASSEMBLY TIPS • Do not use a sharp instrument such as a Knife or Screwdriver to open the packaging, as this may scratch or possibly damage the unit. • All assembly should be done on a clean protected surface such as carpet or the like. •... -
Page 3: Caster Installation
INCLUDED HARDWARE V PARTS Door x1 Door x1 Drawer Parts x5 Keyboard Parts x2 Support Support Locking Casters x2 Right Side Shelf x2 Left Side Shelf x2 Bracket x1 Bracket x1 Non-Locking x2 CASTER INSTALLATION Install the two Locking Casters on the Install the two Non-Locking Casters front tubes of Panel... - Page 4 ATTACHING BACK PANEL TO SIDE PANELS Lay back Panel on a floor or flat surface. Take Side Panel and align holes on side to holes on tubes on right side of Panel . Install by using three Black 15mm Phillips Head Screws from Hardware Packet 3.
- Page 5 CABINET SHELF INSTALLATION Diagram 5 Place one Shelf at the bottom of Cabinet assuring that it is firmly resting on ledges of the interior of the side and back Panels of Cabinet. While holding on a slanted position, place the remaining two Shelves on the edges of side Panels assuring that they are firmly...
-
Page 6: Top Assembly & Installation
While holding Door , insert Pivot of While holding Door , insert Pivot of bottom of Door into the hole located on bottom of Door into the hole located on left side of cabinet bottom. Align Door right side of Cabinet bottom. with the top of Door Frame and slide upper Align Door with the top of Door Frame and Pivot into hole at left side of Door... - Page 7 Using the four remaining four Phillips-Head Once Support Brackets are attached Black 10mm Screws from Hardware to underside of top, begin by holding top Package 3, secure cabinet to top by with front slanted downwards and aligning installing Screws through holes in metal round grooves at the corners of underside strip at front of Cabinet and at back of Top with top of front metal posts.
-
Page 8: Drawer Assembly
Once front panel and Keyboard Panel is attached, secure by turning Cam Bolts to locked position. Diagram 16 Diagram 16 Diagram 17 Slide Keyboard into Tracks that are located just below top of Lectern. Diagram 17 Diagram 18 Using four Zinc Plated 12mm Philip-head Screws attach Keyboard to Tracks by installing screws through... -
Page 9: Drawer Installation
Diagram 22 Tightly screw in one Cam Bolt (Packet 2) at each of the two upper holes of the inside of the Front Panel Tightly insert one Dowel (Packet 2) into each of the holes located on the lower part of the inside of the Front Panel near the groove that runs along the bottom of the Panel. - Page 10 Identify Right Side Shelf Bottom Panel Diagram 27 connect Front Panel to it in the following manner: Tightly Screw in one Cam Bolt (Packet 2) at each of the two outer holes of the inside of the Front Panel Tightly insert one Dowel (Packet 2) at each of the two inner holes of the inside of the Front Panel.
Need help?
Do you have a question about the Oklahoma Sound GSL Series and is the answer not in the manual?
Questions and answers