National Public Seating COLLABORATOR TABLE WITH CROSSBEAM Assembly Instructions

TABLE COMPONENTS
1 Fasten each end of the
crossbeam to each leg by
installing 2 included bolts
through the holes at the
center each leg and into the
ends of the crossbeam.
Congratulations, your table is now assembled and ready to be used!
Dear Customer, Thank you for your purchase. Although extreme care goes into manufacturing &
packaging of this product, mistakes are possible. If you encounter any missing parts or di culty in
assembly, please contact our customer service Toll Free at 1-800-261-4112 or
info@nationalpublicseating.com for courteous & immediate resolution to your problem.
ASSEMBLY INSTRUCTIONS
COLLABORATOR TABLE WITH CROSSBEAM
Tabletop
2x Legs
Crossbeam
2
INCLUDED HARDWARE
36x Screws
TOOLS FOR ASSEMBLY
Drill
Align the leg top plates with
the pre-marked holes on the
tabletop and fasten legs to
tabletop by installing 9
screws through each top
plate into the tabletop.
4x Bolt
Allen Wrench