Status; System - D-Link DFL-700 Manual
Network security firewall
Hide thumbs
Also See for DFL-700:
- Product manual (138 pages) ,
- Manual (85 pages) ,
- Quick installation manual (14 pages)
Table of Contents
Advertisement
Status
In this section, the DFL-700 displays the status information about the Firewall.
Administrator may use Status to check the System Status, Interface statistics, VPN,
connections and DHCP Servers.
System
Click on Status in the menu bar, and then click System below it. A window will appear
providing some information about the DFL-700.
Uptime – The time
the firewall have been
running, since the last
reboot or start.
CPU
Load
Percentage of cpu used.
Connections
Number
of
current
connections trough the
firewall.
Firmware version –
The
firmware
version
running on the firewall.
Last restart – The
reason
for
the
restart.
IDS Signatures –
The
IDS
signature
versions.
There are also two
graphs on this page,
one showing the CPU
usage during the last 24
hours. The other one is
showing the state table usage during the last 24 hours.
–
–
last
74
Advertisement
Table of Contents
