How To Read The Logs; Usage Events; Drop Events; Conn Events - D-Link DFL-700 Manual

How to read the logs

Although the exact format of each log entry depends on how your syslog recipient works,
most are very much alike. The way in which logs are read is also dependent on how your
syslog recipient works. Syslog daemons on UNIX servers usually log to text files, line by line.
Most syslog recipients preface each log entry with a timestamp and the IP address of the
machine that sent the log data:
Oct 20 2003 09:45:23 gateway
This is followed by the text the sender has chosen to send. All log entries from DFL-700
are prefaced with "EFW:" and a category, e.g. "DROP:"
Oct 20 2003 09:45:23 gateway EFW: DROP:
Subsequent text is dependent on the event that has occurred.

USAGE events

These events are sent periodically and provide statistical information regarding
connections and amount of traffic.
Example:
Oct 20 2003 09:45:23 gateway EFW: USAGE: conns=1174 if0=core ip0=127.0.0.1
tp0=0.00 if1=wan ip1=192.168.10.2 tp1=11.93 if2=lan ip2=192.168.0.1 tp2=13.27 if3=dmz
ip3=192.168.1.1 tp3=0.99
The value after conns is the number of open connections trough the firewall when the
usage log was sent. The value after tp is the throughput through the firewall at the time the
usage log was logged.

DROP events

These events may be generated by a number of different functions in the firewall. The
most common source is probably the policies.
Example:
Oct 20 2003 09:42:25 gateway EFW: DROP: prio=1 rule=Rule_1 action=drop recvif=wan
srcip=192.168.10.2 destip=192.168.0.1 ipproto=TCP ipdatalen=28 srcport=3572 destport=135
tcphdrlen=28 syn=1
In this line, traffic from 192.168.10.2 coming from the WAN side of the firewall, connecting
to 192.168.10.1 on port 135 is dropped. The protocol used is TCP.

CONN events

These events are generated if auditing has been enabled.
80