Advertisement
Quick Links
Installation Manual
LCU-SP Series Condensate Pumps
Shallow Pan Design
Models
LCU-SP20S
115 VAC
20' Head
Safety Switch
LCU-SP220S
230 VAC
20' Head
Safety Switch
* Models ending with a "T" suffix (not listed) include 20' of clear discharge tubing
7000 Apple Tree Avenue
Bergen, NY 14416
ph: 800-543-2550
fax: 585-494-1839
www.LibertyPumps.com
Installer: Manual must remain with
owner/operator.
Keep this manual handy for future reference.
For replacement manual, visit LibertyPumps.com,
or contact Liberty Pumps at 800-543-2550.
Retain dated sales receipt for warranty.
Copyright © Liberty Pumps, Inc. 2023 All rights reserved.
Record information from pump
nameplate for future reference:
Model:
Serial:
Mfg Date:
Install Date:
7196000H
Advertisement
Related Manuals for Liberty Pumps LCU-SP Series
Summary of Contents for Liberty Pumps LCU-SP Series
- Page 1 Keep this manual handy for future reference. Serial: Bergen, NY 14416 For replacement manual, visit LibertyPumps.com, ph: 800-543-2550 or contact Liberty Pumps at 800-543-2550. Mfg Date: fax: 585-494-1839 Retain dated sales receipt for warranty. Install Date: www.LibertyPumps.com Copyright © Liberty Pumps, Inc. 2023 All rights reserved.
- Page 2 Safety Precautions For cord replacement: power cord must be of the same length and type as originally installed on the Liberty Pumps product. Use of incorrect cord may lead to exceeding the RISK OF ELECTRIC SHOCK electrical rating of the cord and could result in death, serious injury, or other significant failure.
- Page 3 Finally, check the connections for leakage and proper discharge pipe routing. Before Installation, read the following instructions carefully. Each Liberty Pumps product is individually factory tested to assure Maintenance and Troubleshooting proper performance. By closely following these instructions, potential operating problems should be eliminated, providing years of trouble-free service.
- Page 4 Pump Runs and Removes Water But Does Not Shut Off Liberty Pumps, Inc. shall not be liable for any loss, damage, or expenses resulting from installation or use of its products, or for Float is stuck in the “on” position. Check to make sure the indirect, incidental, and consequential damages, including costs of float is free to move up and down without obstruction.
Need help?
Do you have a question about the LCU-SP Series and is the answer not in the manual?
Questions and answers