Page 2
For cord replacement: power cord must be of the same result in minor or moderate injury. length and type as originally installed on the Liberty Pumps product. Use of incorrect cord may lead to exceeding the Signals an important instruction related to the electrical rating of the cord and could result in death, serious pump.
Page 3
Before Installation, read the following instructions carefully. Each If connecting a pump with a stripped wire cord end, power Liberty Pumps product is individually factory tested to assure connections must be made within a junction box or proper performance. By closely following these instructions,...
Page 4
Pump Runs and Removes Water But Does Not Shut Off Liberty Pumps, Inc. shall not be liable for any loss, damage, or Float is stuck in the ON position. Check to make sure the float expenses resulting from installation or use of its products, or for is free to move up and down without obstruction.
Need help?
Do you have a question about the LCU-N Series and is the answer not in the manual?
Questions and answers