Using Set Menu; Signal Information; Manual Setup - Yamaha HTR-6130 Owner's Manual

Set menu
Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
Parameter
A)DISPLAY SET
B)MEMORY GUARD
C)AUDIO SELECT
D)PARAM. INI
E)BLUETOOTH

■ Signal information

Use this feature to check audio signal information (see page 32).

Using set menu

Use the remote control to access and adjust each
parameter.
y
You can change the set menu parameters while this unit is
reproducing sound.
Press 4 AMP and then press H MENU on
1
the remote control.
"BASIC SETUP" appears in the front panel display.
.
BASIC SETUP
2
Press 7 k / n to select "MANUAL SETUP".
.

MANUAL SETUP

Press 7 ENTER to enter "MANUAL SETUP".
3
"1 SOUND MENU" appears in the front panel
display.
1 SOUND MENU
44
En
Adjusts the brightness of the front panel display.
Locks sound field program parameters and other set menu settings.
Designates the default audio input jack select setting mode for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power of this unit.
Sets all the parameters of the sound field programs to the initial factory settings.
Pairs the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 41).
SIGNAL INFO
Features
4
Press 7 k / n repeatedly and then press
7 ENTER to select and enter the desired
menu.
The following menus appear in the front panel
display as you press 7 k / n repeatedly.
1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
5
Press 7 k / n repeatedly and then press
7 ENTER to select and enter the desired
submenu.
• Repeat this step to navigate to and enter the items
you want to adjust.
• To return to the previous menu level, press
8 RETURN.
6
Press 7 k / n to select the desired parameter
and then 7 l / h to change the parameter
value.
• Press 7 h to increase the value.
• Press 7 l to decrease the value.
Press H MENU to exit from set menu.
7
Page
50
50
50
50
50