Multi Channel Input Setup - Yamaha HTR-6130 Owner's Manual

■ Input rename
B)INPUT RENAME
Use this feature to change the name of the input source
that appears in the front panel display.
The following is an example where "DVD" is renamed
"My DVD".
DVR V-AUX
DVD My DVD
1
Press one of the input selector buttons ( 3 )
or B MULTI CH IN to select the input
source you want to change the name of.
CD MD/CD-R TUNER
DVD DTV/CBL DVR
V-AUX/DOCK
Press 4 AMP and then press 7 l / h on the
2
remote control to place the "_" (underscore)
under the space or the character you want to
edit.
3
Press 7 k / n to select the character you
want to use and then press 7 l / h to move
to the next space.
Notes
• You can use up to 8 characters for each input.
• Press 7 n to change the character in the following order,
or press 7 k to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)
4
Repeat steps 1 through 3 to rename each
input source.
Press H MENU to exit from "INPUT
5
RENAME".
pDVD
DTV/CBL MD/CD-R TUNER CD
MULTI CH IN
or
■ Volume trim
C)VOLUME TRIM
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Press one of the input selector buttons ( 3 ) or
B MULTI CH IN to select the input source you
want to adjust the level.
Choices: CD, TUNER, MD/CD-R, DVD, DTV/CBL,
V-AUX (DOCK), DVR, MULTI CH IN
Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
■ Decoder mode
D)DECODER MODE
Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select "AUTO" if you want this unit to automatically
detect the type of input signals and select the
appropriate decoder mode.
• Select "LAST" if you want this unit to automatically
select the last decoder mode used the connected input
source.
DTS decoder prioritize setting
Choices: AUTO, DTS
• Select "AUTO" if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select "DTS" when you play back a DTS-CD.

■ Multi channel input setup

E)MULTI CH SET
BGV BGV
Use this feature to select the video source played in the
background of the sources input from the MULTI CH
INPUT jacks.
Choices: LAST, DVR, V-AUX, DTV/CBL, DVD
y
Select "LAST" to set this unit to automatically select the last
selected video source as the background video source.
Set menu
49
En