1. Manuals
  2. Brands
  3. SC&T Manuals
  4. Matrix Switcher
  5. HS04M-4K6G
  6. User manual

SC&T HS04M-4K6G User Manual

4k60hz 4 x 4 hdmi matrix switcher built in audio extractor
Hide thumbs

Advertisement

Table of Contents

HDMI Matrix Switcher
User Manual
Model :
HS04M-4K6G
4K60Hz 4 x 4 HDMI Matrix Switcher Built in Audio Extractor
V1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS04M-4K6G and is the answer not in the manual?

Questions and answers

Related Manuals for SC&T HS04M-4K6G

Summary of Contents for SC&T HS04M-4K6G

  • Page 1 HDMI Matrix Switcher User Manual Model : HS04M-4K6G 4K60Hz 4 x 4 HDMI Matrix Switcher Built in Audio Extractor V1.0...
  • Page 2 HS04M-4K6G Introduction HS04M-4K6G is a 4 input 4 output HDMI matrix switch that allows you to route 4 Hi-res HDMI sources to 4 HDMI displays. Moreover, the HDMI audio extraction function allows you to integrate with your existing premium audio equipment to have superior audiovisual experience.
  • Page 3 DC JACK Power input * In standby mode, IR remote cannot control matrix but power on matrix only Notice * Please press ENTER to execution any change of menu settings 2.0 HS04M-4K6G Connection View ETHERNET Receiver MATRIX CONSOLE SPDIF * 4...
  • Page 4 User Manual HS04M-4K6G 3.0 LCM Panel Function Power on Main Screen 4 X 4 HDMI MATRIX Version V1.00 information. After power on, the main screen will show matrix name and version The matrix will back to main screen if no operations in 30 seconds...
  • Page 5 User Manual HS04M-4K6G 4.0 LCM Main MENU Function Operations SWITCH：(Default: 1 2 3 4) OUTPUT 1 2 3 4 INPUT 1 2 3 4 This function is used to switch the input/output port. Enter the SWITCH menu. Press the ENTER key, then the LCM second line INPUT will flash.
  • Page 6 User Manual HS04M-4K6G BUILD-IN MODE This mode supports video resolution up to 4K 60Hz, audio format support LPCM-2CH、LPCM-7.1、 AC3、DTS. After enter BUILD-IN MODE menu, press UP or DOWN key to select then press ENTER to confirm setting. 1.1080P 2CH HS04M-4K6G Player - 1 HDMI –...
  • Page 7 User Manual HS04M-4K6G 4.8 Ethernet * 1. IP ADDRESS 2. SUBNET MASK 3. GATEWAY 4. DHCP CLIENT 5. MEDIA TYPE 6. MAC FILTER IP Address: (Default: 192.168.0.10) IP Address 192.168. 0.10 This function can be setup MATRIX host intranet ”IP Address”, press the ENTER, the left-most number of second row will flash, then press the UP or DOWN button to change the numbers, , press LEFT or RIGHT to move to another location, the move to a position number will flash, press ENTER to complete the setting.
  • Page 8 User Manual HS04M-4K6G to select DISABLE, ENABLE, then press ENTER to complete the setting. Media Type: (Default 100M) Media Type 100M This function can be setup MATRIX host intranet “Media Type, press the ENTER, the second row will flash, then press the UP or DOWN button to select 10M, 100M, AUTO, press ENTER to complete the setting.

  • Page 9: System Info

    AUDIO SELECT: (Default H) This function can set the output of SPDIF to HDMI (H) or ARC (A). OUTPUT 1 2 3 4 AUDIO H H H H SYSTEM INFO Display HS04M-4K6G Matrix firmware version * 1.MAIN V1.00 7. IN4 V1.00 2.WEB V1.00 8.
  • Page 10 User Manual HS04M-4K6G 5.0 Remote Control Function (IR01) To command the matrix locally, setup the remote control IR01 ID with the same code of the Matrix  (see 4.5). The default code is 4. (Power+4) Warning: These settings have to be done the first time you use the IR01 or when you change the ...
  • Page 11 HS04M-4K6G Matrix. 6.0 Remote Control Function：（CONSOLE） HS04M-4K6G support RS232 and TCP/IP control by same command as below: 6.1 For RS232 CONSOLE: Connect the RS232 CONSOLE port to the COM port of the host by a F/M RS232 straight cable (pin 2 to pin 2;...
  • Page 12 User Manual HS04M-4K6G Computer Commend Code Command + △(Space) + Parameter + Enter (0D0A) General Setup [Command] [Description] POWER [00] Set the matrix power OFF △ POWER [01] Set the matrix power ON △ TX01 [00] Set HDMI OUT 1 to OFF △...
  • Page 13 User Manual HS04M-4K6G [Symbol] [Parameter] 01~04 00=OFF, 01=ON 00~09=0~9 00=auto, 01=10M, 02=100M 0~255 Example: [04Enter] To route input 4 to output 1 △ POWER 00Enter To put in standby the matrix △ Commands are case insensitive. The Matrix will reply...

  • Page 14: Switch Setting

    User Manual HS04M-4K6G Ethernet Control Function Initial IP Configuration Setup MATRIX IP Address same as your PC with same domains.(Default 192.168.0.10) MATRIX IP Address method, please refer. to “ETHERNET” Chapter 3. Input IP Address on a web page, you could link to the Web UI of the MATRIX host.
  • Page 15 User Manual HS04M-4K6G Advanced IP address : Change IP address  Subnet mask : Change Subnet mask  Gateway IP : Change Gateway IP  Media Type : Change 10 / 100 / Auto detect  DHCP Client : When setup at Enable, the MATRIX host will automatic get IP Address、Subnet ...
  • Page 16 User Manual HS04M-4K6G Aliases Aliases page can change input/output name, enter Apply to finish the setting after change The  new name will update and correspond to SWITCH SETTING page Output / Input. Press Back jump back to advanced page.
  • Page 17 User Manual HS04M-4K6G Scene Save : Save 10 set of channel settings  Load : Reload 1 of the channel settings  Update: Refresh the status of Load  Back : Back to Advanced page ...
  • Page 18 User Manual HS04M-4K6G 8. Android APP Function APP name: Matrix Controller System Requirement Android 4.0 and up Size: 1.2M Language: English, Traditional Chinese, Simplified Chinese Google Play Download Link https://play.google.com/store/apps/details?id=sct.com.matrixcontroller Google Play Download QR code System Setting Connect mobile phone to Wi-Fi and set the IP/ subnet mask same with matrix network segment Default IP address of matrix is 192.168.0.10...

  • Page 19: Scan Device

    User Manual HS04M-4K6G Main Page When first time enter the APP will see the main page Bottom left「+」to add matrix Bottom right「Info」to show information Scan Device Touch「+」button at main screen to enter「Scan Device」page Touch bottom left「Scan Device」to start scan Touch bottom right pen icon to input the IP address manually...
  • Page 20 User Manual HS04M-4K6G Enter the name of matrix then touch「Add Device」to finish setting Notice：Name should be unique, not allow duplicate It will show「+」icon in front of the IP address when finished Return to main screen you will see the matrix which just add...

  • Page 21: Modify Device

    User Manual HS04M-4K6G Modify Device Press the matrix name to show pop-up dialog Touch「Modification」to enter modification page. Yellow block shows matrix name and icon Green block shows name and icon of output devices Brown block shows name and icon of input devices...
  • Page 22 User Manual HS04M-4K6G Touch yellow block to modify matrix name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the matrix have been changed Touch green block to modify output name and icon...
  • Page 23 User Manual HS04M-4K6G Return to Modification page you will see the output have been changed Touch brown block to modify input name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the input have been changed...
  • Page 24 User Manual HS04M-4K6G Channel Switching mode (load scene, input selection, output selection) Click device name in list to enter load scene page Slide right from load scene page to enter input selection mode (as before) Slide left from load scene page to enter output selection mode (support multiple selection)
  • Page 25 User Manual HS04M-4K6G Load scene Modify scene name Press scene column to show pop-up dialog to modify scene name After modification touch 「Save」to save scene name It will return to Load Scene page automatically. Notice：Name should be unique, not allow duplicate or empty Read scene status Touch top right 「Read」to renew the scene status...
  • Page 26 User Manual HS04M-4K6G It will show pop-up message 「Reading…」 After reading it will refresh scene status Touch the column name to show pop-up dialog Touch 「Yes」to apply scene...
  • Page 27 User Manual HS04M-4K6G Input Selection Mode Top right「Refresh」to renew the status of matrix Below「Refresh」button to power on/off the matrix The block under device are Output 1~ Output 10 (4 by 4 matrix only shows Output 1~Output 4) Left side shows output device name Right sideshows current input device name Bottom left「Save Scene」to save the scenes...
  • Page 28 User Manual HS04M-4K6G Output Selection Mode Top right 「Refresh」to renew the status of matrix Below「Refresh」button to power on/off the matrix The blocks under device are Input 1~ Input 10 (4 by 4 matrix only shows Input 1~Input 4) Left side shows input device name Right side shows current output numbers of devices Bottom left「Save Scene」to save the scenes...

  • Page 29: Save Scene

    User Manual HS04M-4K6G Save Scene In Input or Output Selection page touch bottom left 「 Save Scene」 to enter Save Scene page Touch the Scene column to show pop-up dialog Touch 「Save」to save current channels setting for all output It will return to Save Scene page automatically.
  • Page 30 User Manual HS04M-4K6G Delete Matrix Press the block of matrix in Controller page to show pop-up dialog then touch「Delete」 Touch「Delete」to delete the matrix...
  • Page 31 User Manual HS04M-4K6G 9. iOS APP Function APP name: Matrix Controller System Requirement iOS 7.1 and up Size: 2.3M Language: English, Traditional Chinese, Simplified Chinese iTunes Download Link https://itunes.apple.com/us/app/matrix-control/id904487754?l=zh&ls=1&mt=8 iTunes Download QR code System Setting Connect mobile phone to Wi-Fi and set the IP/ subnet mask same with matrix network segment Default IP address of 10 by 10 matrix is 192.168.0.10...
  • Page 32 User Manual HS04M-4K6G Main Page When first time enter the APP will see the main page Bottom left「+」to add matrix Bottom right「Info」to show information Scan Device Touch「+」button at main screen to enter「Scan Device」page Touch bottom left「Scan Device」to start scan Touch bottom right pen icon to input the IP address manually...
  • Page 33 User Manual HS04M-4K6G Enter the name of matrix then touch「Add Device」to finish setting Notice：Name should be unique, not allow duplicate It will show「+」icon in front of the IP address when finished Return to main screen you will see the matrix which just add...
  • Page 34 User Manual HS04M-4K6G Modify Device Touch the gear icon to enter Modification page Yellow block shows matrix name and icon Green block shows name and icon of output devices Brown block shows name and icon of input devices Touch yellow block to modify matrix name and icon...
  • Page 35 User Manual HS04M-4K6G Return to Modification page you will see the matrix have been changed Touch green block to modify output name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the output have been changed...
  • Page 36 User Manual HS04M-4K6G Touch brown block to modify input name and icon Input the name and select the icon you prefer then touch「Save」to finish Return to Modification page you will see the input have been changed...
  • Page 37 User Manual HS04M-4K6G Channel Switching mode (load scene, input selection, output selection) Click device name in list to enter load scene page Slide right from load scene page to enter input selection mode (as before) Slide left from load scene page to enter output selection mode (support...
  • Page 38 User Manual HS04M-4K6G Load scene Modify scene name Touch the gear icon to enter modify scene name After modification touch 「Save」to save scene name It will return to Load Scene page automatically. Notice：Name should be unique, not allow duplicate or empty Read scene status Touch top right 「Read」to renew the scene status...
  • Page 39 User Manual HS04M-4K6G It will show pop-up message 「Reading…」 After reading it will refresh scene status Touch the column name to show pop-up dialog Touch 「Yes」to apply scene...
  • Page 40 User Manual HS04M-4K6G Input Selection Mode Top right「Refresh」to renew the status of matrix Below「Refresh」button to power on/off the matrix The block under device are Output 1~ Output 10 (4 by 4 matrix only shows Output 1~Output 4) Left side shows output device name Right sideshows current input device name Bottom left「Save Scene」to save the scenes...
  • Page 41 User Manual HS04M-4K6G Output Selection Mode Top right 「Refresh」to renew the status of matrix Below「Refresh」button to power on/off the matrix The blocks under device are Input 1~ Input 10 (4 by 4 matrix only shows Input 1~Input 4) Left side shows input device name Right side shows current output numbers of devices Bottom left「Save Scene」to save the scenes...
  • Page 42 User Manual HS04M-4K6G Save Scene In Input or Output Selection page touch bottom left「Save Scene」to enter Save Scene page Touch the Scene column to show pop-up dialog Touch 「Save」to save current channels setting for all output It will return to Save Scene page automatically.
  • Page 43 User Manual HS04M-4K6G Delete Matrix Touch top right「Edit」button to enter delete mode Touch 「-」button in the left of matrix Touch「Delete」to delete the matrix Touch top right 「Done」to exit...

  • Page 44: Specification

    User Manual HS04M-4K6G Specification ITEM NO. HS04M-4K6G Support Compliance HDMI 2.0, HDCP 2.2, DVI, 3D, HDR, Dolby Vision Max. HDMI Resolution 4K@60Hz 4:4:4 Video Bandwidth 18 Gbps Audio Format LPCM 7.1@192KHz, Dolby TrueHD, DTS-HD MA RS232 Baud Rate 9600bps IR Support 45°, 5M...

Table of Contents