Table of Contents
Advertisement
External Connection
There are 2 scart connections on your television.
When you press the AV button, the source table
will be displayed.
Source
TV
AV1
AV2
AV3
SVHS
PC
DVI
HDMI
YPBPR
1. AV1 when scart input is used
(RGB support)
2. When the AV2 scart input is used
3. When the AV3 PHONO input is used
4. When the SVHS S-Video input is used
5. The PC mode is switched to
6. The DVI mode is switched to
7. The HDMI is switched to
8. The YPBPBR is switched to
To select your desired source, use the
buttons (
)/(
(
) .
(You can return to TV mode by pressing
() button again.
Control Menu
(Press ( ) button. The Menu including
all the setting menus will be visualized
on the screen. You may select any menu
by pressing Up/Down (
enter the menu by right/left ( )/( ) buttons and
switch between the menu subtitles.
Tuning and storing the programs on
your television
You can either tune the programs
automatically or manually store them in
your television.
Note:
If your television does not receive any
broadcast for a period of 5 minutes, it
automatically switches to the stand-by
position. The countdown for the last 5
minutes OSD is displayed on the screen.
) and press the button
)/(
) buttons,
Automatic tuning and storing in the
memory the TV channels via ATS
The ATS (Automatic tuning system) on your TV
enables the automatic finding and sorting of
channels. Sorting is done according to the
selected channels which broadcast teletex and
channel names; followed by all channels with
teletext without channel names and then by
channels without teletext.
(Press ( ) button. Move onto the
settings menu by pressing the right
movement ( ) button. You may directly
access this menu by pressing the Blue
button ( ) . When you press Up/Down
(
)/(
) button, the ATS menu will
appear on the screen. In the country
line select the country the broadcast of
which you want to watch with priority
by pushing the Right/Left movement
button ( )/( ) in the Country line.
Press the (¡) and select the Autoprogram
title or press (
buttons. The prompt menu before the
Automatic Setup will be shown on the
screen. When you press the "Green"
button
( )
press, the Channels will be scanned automatically
and the channels in which broadcast has been
found will start to be saved in the memory as of
the first program. At the same moment, the Auto-
program prompt menu will be displayed and the
mark indicating the position in which the
Automatic Setting function is found will appear.
To stop the process at any given time, please
press the (
) button.
The Program table will appear on the screen
after the automatic search is over.
You can assign any channel to any program
number you would like from among program
numbers that have been stored in the memory
as described in the part Program Table.
To abort the Program table, press the button
.
( )
MENU :Cancel
MENU :Cancel
-17-
) or Right/Left ( )/( )
to start the Auto-program
ATS
country
United Kingdon
autoprogram
TV :Exit
SETUP
ats
installation
program table
TV :Exit
Advertisement
Table of Contents
