Table of Contents
Advertisement
Important Considerations to
Follow:
• General references
Please read the general considerations on safety
and user's manual in detail before connecting the
plasma screen. Only by this way you can use all the
functions safely and securely.
Keep the user's manual as close to the device as
possible to search for information. Follow the
instructions on the device and in the user's manual.
Never let the children use display electrical devices
unattended.
• Use
The plasma TV you have purchased has the highest
quality standards possible in this business line. This
plasma TV contains a display comprising of pixels.
A pixel comprises of three elements (red, green and
blue). Despite the fact that the highest quality check
practices have been used during the manufacture of
screens, some pixels or pixel elements may have
small defects. These faults may occur as continuously
lighted pixels, unlighted pixels or unbalanced pixels
(flashing).
Therefore, these faults are not covered by guarantee.
This is applicable so long as the total of all the faulty
pixels or pixel elements do not exceed the 0.01% of
the total number. The brightness and contrast of
plasma screen decreases in time. Plasma screens
are phosphorus based and in some operating
conditions "Burning" effect may occur. This is actually
the natural deterioration of phosphorus material. This
is a common occurrence in plasma technology.
The operating conditions mentioned above are:
- displaying static images for long durations
- displaying the same background continuously
- using a format other than full screen (e.g. 4:3) for
long durations.
When burning occurs, it is usually not correctable.
Please follow the below listed recommendations to
avoid or decrease burning effect:
- For the first 100 hours of use, please use the
animated pictures or constantly moving still pictures
in full screen mode (slide show).
- Please use your plasma TV in full screen mode
(16:9)
- In case the plasma screen is used as a PC monitor,
please use animated pictures.
Always turn the screen off when not in use.
- Reduce contrast and brightness as far as possible.
- If possible, display the images with maximum
color profundity and scale.
Certain situations may cause a buzzing sound in
the electronics of the screen. This usually results
from the fact that the grounded cables of the
main electric supply are different. A method to
solve this problem is inserting a filter between the
aerial cable and input. These filters are available
at all specialist commercial stores.
• Environmental Conditions
Never use the plasma screen in the environmental
conditions different from the technical data.
Different conditions endangers the device and
may cause fire or fault.
Protect the plasma screen from humidity. This
refers to high moisture, closeness to water, water
drops and water splashes as well as rain. Do not
put any container full of water (e.g. a vase) on the
device.
Protect the device from heat. Keep away from
flames, heating devices, ovens or continuous
direct sunlight.
Protect the screen against heat accumulation. Do
not cover the ventilation holes. In horizontal
position, keep min.10 cm above and below
ventilation holes to furniture and ceiling and 4 cm
from the sides and the back. Do not cover the
TV with cloth. The screen has been designed to
be mounted to a wall.
• Mains connection
This product is Class I and must be connected to
a mains socket with a protective earth. The mains
input and the mains switch are located on the rear
input panel, see page 14. for safe disconnection
of the TV from the manis voltage, the mains switch
is to be turned of and the mains plug is to be
removed from the mains socket. Never use a
damaged mains cable.
-4-
Advertisement
Table of Contents
