Table of Contents
Advertisement
External Connection
There are 2 scart connections on your television.
When you press the AV button, the source table
will be displayed.
Source
TV
AV1
AV2
AV3
SVHS
PC
DVI
HDMI
YPBPR
1. AV1 when scart input is used
(RGB support)
2. When the AV2 scart input is used
3. When the AV3 RCA input is used
4. When the SVHS S-Video input is used
5. The PC mode is switched to
6. The DVI mode is switched to
7. The HDMI is switched to
8. The YPBPBR is switched to
To select your desired source, it is
enough that you use the buttons
(
)/(
) and press the button (
(You can return to TV mode by pressing
() button again.
Control Menu
(Press ( ) button. The Menu including
all the setting menus will be visualized
on the screen. You may select any menu
by pressing Up/Down (
enter the menu by right/left ( )/( ) buttons and
switch between the menu subtitles.
Tuning and storing the programs on
your television
You can either tune the programs automatically
or manually storing them in your television.
Note:
If your television does not receive any broadcast
for a period of 5 minutes, it automatically switches
to the stand-by position. The countdown for the
last 5 minutes ODS is displayed on the screen.
Automatic tuning and storing in the
memory the TV channels
automatically and the channels in which
broadcast has been found will start to be saved
in the memory as of the first program. At the
same moment, the Auto-program prompt menu
will be displayed and the mark indicating the
position in which the Automatic Setting function
is found will appear. To stop the process at any
given time, please press the (
) .
The Program table will appear on the screen
after the automatic search is over.
You can assign any channel to any program
number you would like from among program
numbers that have been stored in the memory
as described in the part Program Table.
To abort the Program table, press the button
.
( )
)/(
) buttons,
ENGLISH -15-
(Press ( ) button. Move onto the
set tings menu by pressing the right
movement ( ) button. You may directly
access this menu by pressing the Blue
button ( ) . When you press Up/Down
(
)/(
) button, the Autoprogram menu
will appear on the screen. In the country
line select the country the broadcast of
which you want to watch with priority
by pushing the Right/Left movement
button ( )/( ) in the Country line.
Press the (¡) and select the Autoprogram
title or press (
) or Right/Left ( )/( )
buttons. The prompt menu before the
Automatic Setup will be visualized on
the screen. When you press the "Green"
button
to start the Auto-program
( )
press, the Channels will be scanned
AUTOPROGRAM
country
United Kingdon
autoprogram
MENU :Cancel
TV :Exit
SETUP
autoprogram
installation
program table
MENU :Cancel
TV :Exit
) button.
Advertisement
Table of Contents
