Table of Contents
Advertisement
From aerial input
1. Connect the RF out socket of the video to the aerial input located
behind the television.
2. Connect the connection cable to the RF socket of the video.
3. Store the video channel in the memory under any program.
4. Press stored video program number.
5. Press the PLAY key of the video.
6. You may connect the aerial cable to the aerial input of your video.
In that case, it is necessary for your video to be turned on so that
you can watch your TV.
Note: If you would like to use your video with the RF socket, select the
program 0.
Via the PHONO or S-Video socket
You can also connect your device to your television via the S-Video
socket. To do this;
Connect the S-Video cable to the S-Video socket and the audio cables
to the audio sockets.
Sound Input (R)
Sound Input (L)
Video Input
Sound Input (R)
S-VHS
Sound Input (L)
Video
AV-2
AV-1
ANT-IN
S-VHS
Insert the 21 pin
Antenna
SCART socket in the 21
pin SCART socket on
the TV.
-28-
Y
Audio In
Pb
L
L
DVI-D
HDMI
R
AV-3
AV-Out
YPbPr
Speaker Out
PC-DVI
PC-IN
Audio In
Advertisement
Table of Contents
