Table of Contents
Advertisement
External equipment connection
AV inputs:
Press the ( ) button on the remote control. The
Source menu, from which you may select the
input mode will appear on the screen.
TV: While in the AV modes, move onto this option
and press the ( ) button for switching to the TV
mode.
AV1: To watch the picture of the device connected
to the Scart1, move onto this option and press
the button (
) .If the connected device has an
RGB output, youwill be able to watch it.
AV2: To watch the picture of the broadcast device
connected to the Scart2, move onto this option
and press the button ( ) . If the connected device
has an RGB output, youwill be able to watch it.
S-VHS: To watch the picture of the device
connected using the S:Video input, move onto
this option and press the button (
AV3: To watch the picture of the device connected
using the PHONO input, move onto this option
and press the button (
PC: To be able to watch the monitor image in
the PC mode, move onto this option and press
the (
) button.
DVI: To be able to watch the image in the DVI
mode, move onto this option and press the ( )
button.
HDMI: To be able to watch the image when a
connection is made via the HDMI socket, this
option must be selected.
YPBPBR (Component Input): To be able to
watch the image when a connection is made via
the this socket, this option must be selected.
) .
) .
Connecting a Video Recorder
from the SCART socket
Before making the connections, make sure first
that your television and the video recorder are
turned off.
Connect one end of the Scart socket cable (not
supplied with the television) to the suitable
connection terminal of the video recorder and
the other end to the Scart connection point behind
your television.
Turn on your television and video recorder.
By pressing the ( ) button on your
remote control, select the input AV1 or
AV2 to which you connected your device.
AV
Note:
To connect a RGB-supported external
device to your television, it is necessary that you
use a RGB supported Scart cable. If your external
device is supported in that case, you can set the
output as RGB.
Via the PHONO or S-Video socket
Before making the connections, make sure first
that your television and the video recorder are
turned off.
Connect one end of the Scart socket cable (not
supplied with the television) to the suitable
connection terminal of the video recorder device
and the other end to the Scart connection point
behind your television.
Turn on your television and video recorder device.
If the sound is mono, use the Left Audio (L) input
and select MONO from the sound settings menu.
If you would like to use your VCR by connecting
it to your television at the modulator outlet with
an aerial cable, select the program '0' which is
set for this type of connection.
-27-
Advertisement
Table of Contents
