Table of Contents
Advertisement
Temporary Freezing (Freeze): You may freeze
the program picture you are watching. For
this, press the (
OK/
control when there is no menu on the
FREEZE
screen The program picture will be paused
until the same key is pressed for the
second time.
Note: The Freeze feature does not function when
there is a PIP picture on the screen.
Using the PIP (Picture in Picture) Feature:
Press the ( ) button on your remote
control. The PIP window selection menu
PIP SEL.
appears on the screen.
Selecting either the picture-in-picture (PIP) or
picture-and-picture (PAP) option, press the button
(
) . According to the selected option, a window
will be opened inside the main picture and a sub-
screen will be displayed. If you select the full screen
mode, the PIP disappears.
In the event that you wish to exit PIP mode for any
reason, simply press the
remote control.
Note:
1) By turning on the PIP picture from the program
you are watching or the AV mode, you can change
the other programs from the main picture.
2) You can turn on the PIP from the PC or DVI
mode.
3) The same AV input cannot be watched on the
PIP and the main picture.
PIP Position:
With this option, you can change the
position in which the PIP window is shown
PIP POS.
on the screen. For this, press the ( )
button when there is PIP picture on the
screen and view the PIP position selection
menu on the screen.
Here, press the ( ) button and set the PIP window
position; then select full screen with ( ) button on
your remote control and exit this menu.
) button on the remote
key found on your
( )
PIP Dimension:
With this option, you may zoom in and
zoom out the PIP window size. For this
PIP SIZE
purpose, you may set the PIP size by
pressing the ( ) button while there is a
PIP picture on the screen.
PAT Mode:
While watching a broadcast on your television, you
can enter the PAT (Picture and teletext) mode
pressing the ( ) button on your remote control.
Thanks to this feature, you can also follow
the teletext broadcast if there is also a
PAT
teletext broadcast in the program that is
being watched. To abort this mode, press
again the ( ) button found on your remote
control.
-24-
Advertisement
Table of Contents
