Connecting A Decoder - Beko 20LB330 Operating Instructions Manual

Connecting a decoder

Via SCART
Make sure the TV and decoder are both switched
off.
Plug one end of the SCART lead (not supplied)
into the back of the decoder and the other end
into the SCART on the back of the TV.
Switch on the decoder and the TV.
( )
Press the
control to select AV1.
Via Phono lead
Make sure the TV and decoder are both switched
off.
Note: For Decoder connection Via phono lead
your Decoder device must have the tuner built
in.
button on the remote
Plug one end of the phono lead into the video
and audio out sockets on the back of the decoder
and plug the other end into the video and audio
in sockets on the TV.
-24-