Tuning The Tv; Automatic Tuning - Beko 20LB330 Operating Instructions Manual

AV
Your television has 2 SCART sockets.
The AV function is used when you are connecting
an external source to your TV via the SCART
sockets or PHONO sockets. Every time you press
( )
the button, your default settings will change
according to the socket connection below.
1. AV1 when using SCART socket 1
(with RGB support)
2. AV2 when using the RCA socket
"when TV has only 1 scart" AV2 when
using SCART socket 2 "when TV has 2
scart sockets"
3. AVS when using S-Video socket "when TV
has only 1 scart" AV3 when using RCA socket
"when TV has 2 scart sockets"
4. AVS when using S-Video socket "when TV
has 2 scart sockets" You can return to TV mode
by pressing AV button again.
Control Menu
( )
Press the
appear. The Up-Down buttons
enable you to move between the different
control menu functions where you can
indicate your choice by pressing the
button.
Press the left or right movement buttons
( )/( )
to adjust.
Press MENU button to return to MAIN
MENU.
Features
button the MAIN MENU will
(
Picture
Sound
Set-Up
Tuning and storing the programs on
your television
You can either tune the programs automatically
or manually storing them in your television. As
a result of your television's Automatic Tuning
System (ATS), the programs found are
automatically stored.
Please note: If your television does not receive
a signal for 5 minutes, then it will automatically
switch to the stand-by mode.
This will be indicated on screen during the last
minute before switching to the stand-by mode.
Automatic tuning and storing of the
television program channels
(AUTOPROGRAM)
Press the
control, the MAIN MENU will appear
use down button
SET-UP.
)/( )
( )
-11-
( )
button on your remote
( )
to highlight