Beko 20LB330 Operating Instructions Manual page 17

Language
In the FEATURES MENU highlight the
LANGUAGE mode in white press the
button, to access to the LANGUAGE
menu.
(
movement
indicate the language of your choice,
once again press the
All the function modes of your television
will be displayed in the language that
you have indicated. To exit the application
at any stage, press the
the O.S.D. language will change. Not
teletext or TV sound language.
English
Deutsch
Francais
Italiano
Espanol
Portuguesa
E
Pycc
TIME
In the FEATURES MENU use the numeric buttons
to enter the time. The time that is stored here will
be used as the basis in all activities based within
the TIMER mode.
Please Note: The time will be reset when you
turn off your television, but will adjust itself to the
time of any channel with Teletext once you switch
on your television again, getting the necessary
information from the transmission.
SLEEP TIMER Mode
In the FEATURES MENU highlight the TIMER
( )
option and press
TIMER menu on screen. With this function, you
will have the ability to automatically turn your
television on or off at the time of your choice, or
enable your television to shift from one channel
to another at a time of your choice.
)/( ), ( )/( )
buttons,
( )
button.
( )
button. Only
Swenska
Norsk
Türkçe
Dutch Suomi
Polski
Magyar
Cesky
hnika Româneşte
Slovensky
K
Dansk
, which will bring the SLEEP
PROGRAMME NO
You can insert the program number of
the channel that your television will
( )
automatically switch on, or shift to using
the right-left movement
TIME SELECT ON
Highlight the time select ON mode and
press the
buttons to insert the time that you want
your television to switch on. If television
is in Stand-By mode at this time, then it will
automatically switch on, if it is already on then
it will switch to the channel program indicated.
In this way you can preset the time of the program
you wish to follow and have your television switch
to them at their starting time automatically.
TIME SELECT OFF
Highlight the time select OFF mode and
press the
buttons to insert the time that you want
your television to switch off. During the
last minute before your television is
programmed to switch off to stand-by,
the on screen display indicating that there
is one minute remaining will appear. In the event
that you wish to exit stage, press the
Please note: If you turn your television off from
the main power supply switch then the sleep timer
modes selected will cancelled.
Picture Format
By pressing the
control, you have the ability to change
the picture format of the screen. If you
leave the screen format function on AUTO
then the program that you are viewing will be
shown in either 4:3 or 16:9 format depending
on the transmission broadcast.
A black band may be present top and bottom of
the picture dependant on the broadcast this is
not a fault.
-18-
( )/( )
( )
button, use the numeric
( )
button, use the numeric
( )
( )
button on your remote
buttons.
button.