Programmed Play - Aiwa CX-NMT50 Operating Instructions Manual

RANIDOM /REPEAT PLAY
Use the remote control.
RANDC)M play
All the tracks on the selected disc or on all the discs can be
played randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press the RANDOM/REPEAT button.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REF'EAT play — G lights up on the display.
RANI]OM/REPEAT play — RANDOM and ~ light upon the
display.
Cancel — RANDOM and ~ go out from the display.
To play all discs, press the +> button to start play.
To play a single disc, press the DISC DIRECT PLAY button,
then press one of the numbered buttons (l-3) within 3 seconds
to start Iplay.
m
During random play, the following operations are not possible:
-to select the tracks directly with the numbered buttons.
-to skip to the previously played track with the < button.
PROGRAMMED PLAY
Up to :30 tracks can be programmed from any of the inserted
discs.
Use the remote control
1
2
Press
the PRGM button twice in stop mode.
The PRGM indicator lights up on the display.
PRGM
* When the PRGM button is pressed once in step 1,
enl.ers the KARAOKE PROGRAM (see page 20).
the unit
Press the DISC DIRECT PLAY button, then press
one of the numbered buttons 1 to 3 within 3
se(conds to select a disc.
The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
3
4
5
Press the numbered buttons and the +1 Clbutton
to program a track.
Example:
To select the 25th track, press the +1 O, +1 O and 5 buttons.
To select the 10th track, press the +1 O and O buttons.
Total playing time c,f
Program number
the selected tracks
Selected track number
Total number of
selected tracks
Repeat steps 2 and 3 to program other tracks.
Press the +> button to start play.
To check the program
Each time the 4 or > button is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
To clear the program
Press the CLEAR button in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press the RANDOM/REPEAT
button repeatedly until c& appears on the display.
During programmed play, you cannot perform random play, check
the remaining time, and select a disc or track.
ENGLISH
10