Table of Contents
Advertisement
Monthly
1.
Assess the components around the cable pulley. If there is an intense build
up of dust or debris, contact our customer service to schedule a technician
to properly clean and restore the components before using your Echelon
Strength Pro again.
2. Inspect the cables for damage. If damaged, replace by contacting Customer
Service (833-937-2453).
3. If you find the column unable to swivel, the motor for the locking pin will
require adjustment or lubrication. Using a step ladder, remove the two 6mm
bolts from the top cap of the unit to assess the arm locking motor for any
issues related to this failure.
Yearly
1.
Contact customer service (833-937-2453) if you are experiencing any issues.
Monthly | 1
CarE & MaInTEnanCE |
41
Advertisement
Table of Contents
Need help?
Do you have a question about the STRENGTH PRO and is the answer not in the manual?