Page 1
USER MANUAL Self-Contained Emergency Light SNP And SEMP Series LED AC Power Will turn on indicating that the unit is receiving power. LED Charge/Fully Charge will indicate if the battery is charging. Switch On/Off Use to turn the lamp on or off (while the unit is not plugged in Switch Test Use to test the unit...
Page 2
Installation and Operation 1. Check if the electric socket is providing 220-240VAC power. If not please make sure it does before moving on to the next step. 2. Install or hang the unit in a location where emergency illumination is required. Make sure the unit is installed securely to prevent any possible accidents.
Page 3
Initial Trouble Shooting Cause Problem What to do - Power not getting to the unit - The power socket might not have - Check the 220-240VAC power after plugging in. any power. supply. The LED AC light does not - Check the plug and socket. - The plug or socket is loose.
Page 4
Note : Please read the manual carefully before installation and operation to understand how to properly operate the unit. For any further questions about your product IsOn Import-Export Co., Ltd. please feel free to contact SUNNY’s customer 2915-2917 Ladprao Road, Klongjan, service department. Tel. (+66) 02-948-4450-2 Bangkapi, Bangkok 10240 E-mail: service@sunnyemergencylight.com...
Need help?
Do you have a question about the SNP Series and is the answer not in the manual?
Questions and answers