Sunny SG Series User Manual

Self-contained emergency light

Advertisement

User Manual
Self-Contained Emergency Light SG And TM Series
1. LEDs with a lifetime of over 50,000 hours, providing bright and constant illimitation
throughout its operation.
2. Provides bright and constant illimitation throughout its operation.
3. The unit has an "AUTO TEST" function that will self-test every 30 days for a duration
of 30 minutes
4. The emergency lamp has a special function and can be used instead of desk or floor lamps
to provide illumination even when there are no power outages. The unit can provide bright
and long lasting illumination and can be set to turn off automatically after 1,2,3,6
or 12 hours through the infrared remote.
5. The unit has a Battery Low Voltage Cut-Off to prevent the battery from draining
completely, which helps to extend the life of the battery.
6. The unit charges the battery with a constant Voltage while limiting the current, extending
the life of the battery.
7. The unit has a Time Delay function to keep the emergency lights on for another 5-8 seconds
after normal power has been restored to make sure the regular lights are back on before
turning off.
Shows when the unit
is receiving power
Indicator on when unit is
ready for operation
Press to assess the status of the unit
Press to turn on the LEDs
Press to turn off the LEDs
Status Indicators and Testing Buttons
Remote Testing

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SG Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sunny SG Series

  • Page 1 User Manual Self-Contained Emergency Light SG And TM Series Shows when the unit is receiving power Indicator on when unit is ready for operation Press to assess the status of the unit Press to turn on the LEDs Press to turn off the LEDs Status Indicators and Testing Buttons Remote Testing Installation and Operation...
  • Page 2 Installation and Operation 1. Check to make sure that the power socket of the home or building is providing a 220 Vac current. 2. Install the unit properly at the location where emergency light is needed. Check to make sure the unit is properly secured to prevent possible accidents. 3.
  • Page 3 Initial Trouble Shooting Cause Problem What to do - Power not getting to the unit - The power socket might not have - Check the 220VAC power supply. after plugging in. any power. The LED AC light does not - The plug or socket is loose. - Check the plug and socket.
  • Page 4 Note : Please read the manual carefully before installation and operation to understand how to properly operate the unit. For any further questions about your product IsOn Import-Export Co., Ltd. please feel free to contact SUNNY’s customer service department. 2915-2917 Ladprao Road, Klongjan, Tel. (+66) 02-948-4450-2 Bangkapi, Bangkok 10240 E-mail: service@sunnyemergencylight.com...

This manual is also suitable for:

Tm series

Table of Contents