Page 1
USER MANUAL Self-Contained Emergency Light SNP Series LED AC Power Will turn on indicating that the unit is receiving power. LED Charge/Fully Charge will indicate if the battery is charging. Switch On/O Use to turn the lamp on or o...
Page 2
Installation and Operation 1. Check if the electric socket is providing 220Vac power. If not please make sure it does before moving on to the next step. 2. Install or hang the unit in a location where emergency illumination is required. Make sure the unit is installed securely to prevent any possible accidents.
Page 3
Initial Trouble Shooting Cause Problem What to do - Power not getting to the unit - The power socket might not have - Check the 220VAC power supply. after plugging in. any power. The LED AC light does not - The plug or socket is loose. - Check the plug and socket.
Page 4
Note : Please read the manual carefully before installation and operation to understand how to properly operate the unit. For any further questions about your product IsOn Import-Export Co., Ltd. please feel free to contact SUNNY’s customer service department. 2915-2917 Ladprao Road, Klongjan, Tel. (+66) 02-948-4450-2 Bangkapi, Bangkok 10240 E-mail: service@sunnyemergencylight.com...
Need help?
Do you have a question about the SNP Series and is the answer not in the manual?
Questions and answers