Acelity V.A.C.ULTA Service Manual page 25

Therapy Unit Testing
Setup
1. If the unit is not powered on press and hold the Power
button until the light comes on to turn the V.A.C.ULTA™
Therapy Unit on.
Faa FARS VE LE PE Så
AM
Mode: Continuous
New Patient
Warning:
To help reduce the potential risk of serious or fatal injuries
{including bleeding, infection and other conditions), always
consult a physician prior to each use, and read and follow all .
labeling and literature accompanying this product, especially 2. Un p lu g the unit from the power su pply and ensure the
m battery symbol shows a full charge before continuing.
If the battery needs charging see the Charge Battery section.
Safety information can be found in the instructions for use in
each carton of dressings and/or with therapy unit.
ye VA.C
VERAFLO™
Therapy
utenti 3. Press the V.A.C.° Therapy button on the Startup screen.
VAC. VERAFLO™
Therapy
PREVENA" ABTHERA™
Therapy
Therapy
4. Press and hold the Power button until the display turns off to
PREVENA™ ABTHERA™ turn the V.A.C.ULTA™ Therapy Unit off.
Therapy Therapy
5. Wait for the screen and all lights to go off
before continuing.
261212016 1700 i i
V.A.C.© Therapy a 1 6. Press and hold the Power button until the light comes on to
Mode: Continuous © turn the V.A.C.ULTA" Therapy Unit on.
Startup
Warning:
To help reduce the potential risk of serious or fatal injuries
{including bleeding, infection and other conditions), always
consult a physician prior to each use, and read and follow all
labeling and literature accompanying this product, especially
safety information.
7. Press the QC Checklist button on the Startup screen.
Safety information can be found in the instructions for use in
each carton of dressings and/or with therapy unit.
y
ac Continue
Checklist Therapy
23