Information On This Manual; Validity; Scope; Target Group - Lux Power Technology SNA-EU 12K User Manual

Information on this Manual

Validity

This manual is valid for the following devices: SNA-EU 12000

Scope

This manual provides the installation, operation and troubleshooting of this unit, please read this
manual carefully before installations and operations.

Target Group

For qualified persons and end users. Qualified persons and end users must have the following skills:
Knowledge about this unit operation.
Training in deal with the security issues associated with installations and electrical safety.
Training in the installation and commissioning of electrical devices and installations.
Knowledge of the applicable local standards and directives.

Safety Instructions

WARNING: This chapter contains important safety and operating instructions. Read and keep this
manual for future reference.
All the operation and connection need to be operated by qualified persons.
Before using the unit, read all instructions and cautionary marking on the unit. Any damage caused
by inappropriate operation is not warranted by Luxpower .
All the electrical installation must comply with the local electrical safety standards.
Do not disassemble the unit. Take it to a qualified service center when service or repair is required,
incorrect re-assembly may result in a risk of electric shock or fire. Do not open inverter cover or
change any components without Luxpower's authorization, otherwise the warranty commitment for
the inverter will be invalid.
To reduce risk of electric shock, disconnect all wirings before attempting any maintenance or
cleaning, turning off the unit will not reduce this risk.
CAUTION-To reduce risk of injury, charge only deep-cycle lead-acid type rechargeable batteries and
lithium batteries, other types of batteries may burst, causing personal injury and damage.
NEVER charge a frozen battery.
For optimum operation of this unit, please follow required spec to select appropriate cable size and
breaker.
Please strictly follow installation procedure when you want to disconnect AC or DC terminals, please
refer to INSTALLATION section of this manual for the details.
GROUNDING INSTRUCTIONS -This unit should be connected to a permanent grounded wiring
system, be sure to comply with local requirements and regulation to install this inverter.
NEVER cause AC output and DC input short circuited. Do not connect to the mains when DC input
short circuits.
User Manual
1