PURSUIT S 248 SPORT 2023 Owner's Manual
  1. Manuals
  2. Brands
  3. PURSUIT Manuals
  4. Boat
  5. S 248 SPORT 2023
  6. Owner's manual

PURSUIT S 248 SPORT 2023 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
DECEMBER 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S 248 SPORT 2023 and is the answer not in the manual?

Questions and answers

Related Manuals for PURSUIT S 248 SPORT 2023

Summary of Contents for PURSUIT S 248 SPORT 2023

  • Page 1 OWNER’S MANUAL DECEMBER 2023...
  • Page 2 (CO) is colorless, odorless and extremely dangerous. Indicates a hazardous situation which, if not avoided, will result in death or Every precaution has been taken by Pursuit serious injury. Fishing Boats to reduce the risks associated with death, possible injury and damage from fire or explosion.

  • Page 3: Table Of Contents

    Table of Contents Seating Positions Trim Tabs ........... 2-3 Optional Electronics ......2-4 Seating Positions ........1 Compass ........2-4 Safety Label Locations 2.10 Control Systems Maintenance ..2-4 Label List ............ 2 Fuel Systems Label Table ..........3 General .......... 3-1 General Information Fuel System ........
  • Page 4 Table of Contents Routine Maintenance Safety Equipment 11.1 General .........11-1 General .......... 9-1 11.2 Exterior Hull and Deck ....11-1 Engine Alarms ........ 9-1 11.3 Seats, Upholstery, Canvas Neutral Safety Switch ..... 9-1 and Enclosures ......11-4 Engine Stop Switch ......9-1 11.4 Cabin Interior ........

  • Page 5: Seating Positions

    Seating Positions 1  2  3  4  STANDING  POSITIONS  9*  10*  9*  10*  5  6  7  8    **NOTE** Position 9 and 10 are Standing Positions  S 248 Occupant Positions  S 248 SPORT...

  • Page 6: Safety Label Locations

    Safety Label Locations Label List The numbers correspond to the table. To obtain replacement labels refer to the part number in the table and contact Pursuit Customer Relations at (772) 460-4626. 13,21,68,69 48,67,86 4,79 4,79 9,11 10,16,38,43,44,49 ,60,87,88 22,54,55,67,70 38,47,57...

  • Page 7: Label Table

    Safety Label Locations Label Table Labels and Logos Not All Labels And Logos May Apply For This Model LOGO: "P" 12V LED, LIGHTED P/N: 5346801 LABEL, CAUTION - HOT WATER HEATER P/N: 5430190 LABEL, WASHDOWN/BAITWELL PICKUP P/N: 5435220 LOGO: "P" SMALL PLATINUM P/N: 5437700 LABEL, WARNING CO HATCH P/N: 5437750...
  • Page 8 Safety Label Locations LABEL, WARNING SUNSHADE STOWAGE P/N: 5450054 LABEL, NOTICE DASH PANEL CLEANING P/N: 5450055 LABEL, FUEL SYSTEM WARNING MYLAR P/N: 5450060 LABEL, BOATMAN'S CHECKLIST P/N: 5450120 LABEL, "110 VOLTS" RED ON WHITE P/N: 5450170 LABEL, "FRESH WATER" P/N: 5450260 LABEL, "RAW WATER"...
  • Page 9 Safety Label Locations LABEL, BOARDING DOOR WARNING P/N: 5450551 LABEL, FISH BOX VALVE PORT P/N: 5450580 LABEL, FISH BOX VALVE STBD P/N: 5450585 PLATE, YACHT CERTIFICATION OVER 26' ALL P/N: 5450650 LABEL, STORAGE AREA NOTICE MYLAR 3"X1-1/8 P/N: 5450710 LABEL, GELCOAT DAMAGE NOTICE MYLAR 3" LONG P/N: 5450720 LABEL, "FORWARD"...
  • Page 10 Safety Label Locations TAG, LEXAN "HEAD OVERBOARD DISCHARGE" P/N: 5450805 TAG, LEXAN "AIR CONDITIONING PICKUP" P/N: 5450810 TAG, LEXAN "WASHDOWN PICKUP" P/N: 5450815 TAG, LEXAN "BAITWELL PICKUP" P/N: 5450820 TAG, LEXAN "FUEL SYS ENG WITHDRAWL STBD" P/N: 5450825 TAG, LEXAN "FUEL SYS ENG WITHDRAWL PORT"...
  • Page 11 Safety Label Locations TAG, LEXAN "TO DECK PUMPOUT" P/N: 5450845 TAG, LEXAN "FROM WASTE TANK" P/N: 5450850 TAG, LEXAN, GREEN "WINTERIZED" P/N: 5450855 LABEL, HAZARDOUS VOLTAGE (WRAP AROUND) P/N: 5451120 LABEL, NO SMOKING P/N: 5451130 LABEL, CAPACITY TOWER Y8 P/N: 5451160 LABEL, WARNING PROPELLER, SWIM PLATFORM P/N: 5451180...
  • Page 12 Safety Label Locations LABEL, MANUAL DOOR OVERRIDE "UP" P/N: 5451781 LABEL, "FIRE EXTINGUISHER INSIDE" P/N: 5452010 LABEL, "ESCAPE HATCH" WHITE/CLEAR P/N: 5452020 LABEL, WARNING "DO NOT RUN W/HELM OPEN" P/N: 5452510 LABEL, WARNING HARDTOP P/N: 5453160 TAG, WARNING CA CODE PROP 65 P/N: 5453551 LABEL, "SLING"...
  • Page 13 Safety Label Locations LABEL, WARNING CO CABIN P/N: 5453680 LABEL, WARNING CO HELM P/N: 5453690 LABEL, "NO STEP" 3"X8" RED/WHITE P/N: 5453970 LABEL, KIT FOR FUSE BLOCK P/N: 5454010 PLATE, CAPACITY C 238 MY2016 P/N: 5454215 PLATE, CAPACITY DC 235 MY2017 P/N: 5454216 LABEL, "DISCHARGE OF OIL PROHIBITED"...
  • Page 14 Safety Label Locations LABEL, FILL W/DIESEL ONLY P/N: 5454580 LABEL, "NMMA" CERT SLVR/BLK 2IN CIRCLE P/N: 5455250 LABEL, ENGINE FLUSHING SYSTEM P/N: 5455602 LABEL, NOTICE CONSISTENT TEMPERATURE P/N: 5455650 LABEL, NOTICE KEEP HATCHES CLOSED P/N: 5455660 LABEL, WARNING HOT SURFACE - GRILL P/N: 5455680 LABEL, WARNING V - BERTH TABLE P/N: 5455770...
  • Page 15 Safety Label Locations LABEL, WARNING "DO NOT DRILL" P/N: 5455830 LABEL, DANGER "DO NOT EXCEED 1000LB CAP" P/N: 5455840 LABEL, WARNING SUNPAD FILLER P/N: 5455870 LABEL, WARNING NO FLAMMABLE LIQUIDS P/N: 5455950 LABEL, WARNING WINDLASS LEWMAR P/N: 5455960 LABEL, NOTICE ANCH RODE LEWMAR P/N: 5455970 LABEL, NOTICE BALL VALVE ACTUATOR P/N: 5456080...
  • Page 16 Safety Label Locations LABEL, NOTICE WINDSHIELD CLEANING P/N: 5456090 LABEL, CAUTION "SEAT ASSEMBLY" P/N: 5450215 LABEL, WARNING "FALLING OVERBOARD" P/N: 5450062 LABEL, "TOWER CAPACITY" P/N: 5453602 LABEL, WARNING "FALLING OVERBOARD" P/N: 5454491 S 248 SPORT...
  • Page 17 Safety Label Locations LABEL, WARNING "FALLING FROM HARDTOP" P/N: 5453601 LABEL, GYRO PICKUP P/N: 5450821 LABEL, "S 248" P/N 5450075 LABEL, BATERY TRAY P/N 5456085 LABEL, SUNPAD P/N 5450079 S 248 SPORT...
  • Page 18 Safety Label Locations LABEL, DO NOT OCCUPY SEAT P/N 5450078 LABEL, AMERICAN MADE P/N 5455601 LABEL, WINDOW SHADES P/N 5450083 LABEL, SHORE WATER SUPPLY P/N 5450082 LABEL, RIDING IN CONSOLE P/N 5455600 S 248 SPORT...
  • Page 19 Safety Label Locations LABEL, DAMAGE MAY OCCUR P/N 5452025 LABEL, CAPACITY PLATE P/N 5450084 To obtain replacement labels, contact Pursuit Customer Relations at (772) 460-4626. S 248 SPORT...

  • Page 20: General Information

    General Information S 248 Engine and General Specifications Maximum Horsepower ............... 300 HP (224 kW) L.O.A ....................25' 8" (7.82 meters) Beam ....................8' 6" (2.59 meters) Draft (fully loaded, motors up) ............1' 10" (0.56 meters) Draft (fully loaded, motors down) ............3' 0" (0.91 meters) Clearance with Hardtop (from waterline) .........8' 10"...

  • Page 21: Boat Information

    General Information Boat Information Fill out the following information and leave it in your PURSUIT Owner’s Manual. This information will be important for you and PURSUIT service personnel to know, if and when you may need to call PURSUIT for technical assistance or service.

  • Page 22: Warranty & Warranty Registration Cards

    This information will be important for you Pursuit Boats will confirm, in writing, that the and service personnel to know, if and transfer of warranty has taken place. After when you may need service or technical which, the transferee will be treated as the information.

  • Page 23: Registration And Documentation

    General Information flooding of mechanical spaces if a break with your dealer or state boating authority in a line were to occur. Since it is assumed for numbering requirements. The Coast the vessel will be unoccupied during towing Guard issues the certificate of number in operations this is a critical step prior to Alaska;...

  • Page 24: Required Equipment

    General Information sharpen your skills or bring you up to date on current rules and regulations. They can also help in pro viding local navigational information when moving to a new boating area. Contact your dealer, State Boating Authority or the Boating Safety Hotline, 800-368-5647 or uscgboating.
  • Page 25 General Information Operator Notes S 248 SPORT...

  • Page 26: Propulsion Systems

    NOTICE 1.1 General Use only the fuel recommended by the engine manufacturer. Use of Your Pursuit boat is designed to be powered old, contaminated fuel can cause with a 2-cycle or 4-cycle outboard engine. the engine to malfunction or severe damage.

  • Page 27: Engine Lubrication

    Section 1 Propulsion Systems 1.4 Engine Cooling System CAUTION Outboard engines are raw water (sea water) cooled. Water is pumped through the water DO NOT use copper-based coatings inlets, circulated through the engine block, or any coatings not approved for and expelled with the exhaust through use with aluminum.

  • Page 28: Engine Instrumentation

    The instrumentation is unique off the engine, investigate the problem to the type of outboard engines installed and correct it. on your Pursuit. Your boat may not be equipped with all of the following gauges. Some models may be equipped with Fuel Gauge Yamaha Command Link Integrated Information System®.
  • Page 29 Section 1 Propulsion Systems Engine Alarms Most outboards are equipped with an audible alarm system mounted in the helm area to monitor selected critical engine systems and functions. The alarm will sound if one of these systems begins to fail. Refer to the engine owner’s manual for information on the alarms installed with your engines.

  • Page 30: Helm Systems

    If the engine Pursuit. starts in gear during this test, immediately The helm on your Pursuit is designed for a move the control levers to the neutral control with a single gear shift and a throttle position and turn the engine off.

  • Page 31: Engine Power Tilt And Trim

    2.5 Engine Stop Switch and possibly overboard. Your Pursuit is equipped with an engine stop switch and lanyard. When the lanyard WARNING is pulled away, it will shut off the engine.

  • Page 32: Steering System

    Helm Systems Section 2 Before leaving the dock, make sure that the tabs are in the full “UP” position by holding the control in the bow "UP" position for ten seconds. Do not continue to operate the switch when the tabs are fully up or down. Establish the intended heading and cruise speed before attempting to adjust the hull attitude with the trim tabs.

  • Page 33: Optional Electronics

    Control system adjustments may become Use only soapy water with a soft, non-abra- panel. Use only soapy water with a soft, see your Pursuit Dealer. necessary. If adjustments are necessary, sive cloth to assure the best appearance. non-abrasive cloth to assure the best see your Pursuit Dealer.
  • Page 34 Check steering operation and visually inspect for loose or missing hardware before operating the boat. If you suspect the steering system is damaged, see your Pursuit dealer. DO NOT operate the boat if you suspect the steering system is malfunctioning. WARNING...
  • Page 35 Section 2 Helm Systems Operator Notes S 248 SPORT...

  • Page 36: Fuel Systems

    DANGER 3.1 General FIRE/EXPLOSION HAZARD Fuel and their vapors are highly The fuel system of your Pursuit boat is explosive when exposed to open designed to meet the requirements of flame or spark, resulting in death or the U.S. Coast Guard, Environmental serious injury.

  • Page 37: Fuel System

    After fueling, screw the cap on in a clockwise clockwise direction until an audible click is lost or damaged replace only with original The fuel system on your Pursuit boat has direction until an audible click is heard indi- The fuel system on your Pursuit boat heard indicating that the cap is seated.

  • Page 38: Fueling Instructions

    Fuel system damage, related to use of alcohol-blended fuels, is not covered by the Pursuit Limited Warranty. Refer to the engine owner's manual for specific fuel requirements for your engines.
  • Page 39 Your 6. Put nozzle in the fuel fill opening. Pursuit dealer or the engine manufacturer can provide additional information on fuel 7. The fuel delivery system will shut off degrading and fuel stabilizers recommended when the tank is filled to the proper for your engine.

  • Page 40: Electrical Systems

    4.2 DC System 4.1 General Batteries The 12-volt batteries have been selected Your Pursuit boat is equipped with a 12 volt to provide optimum performance for engine DC electrical system. The DC system draws starting, and house and electronics loads.
  • Page 41 Section 4 Electrical Systems Battery Switch Panel The batteries are controlled with a single CAUTION battery switch located in the head. The switch can be used to turn on the battery current or parallel the two batteries if DO NOT operate the boat with the needed.

  • Page 42: Helm Switch Panel

    Electrical Systems Breakers Electronics Main The main breakers are located in the battery This is reserved for electronic accessories switch panel and provide protection for all installation. An electronic bus is located DC power. The breakers in the battery panel behind the helm.
  • Page 43 Electrical Systems Horn Aft Bilge Activates the boat horn. Depressing the switch will activate the respective manual pump. If the automatic pump activates, the automatic bilge pump Nav/Anc indicator on the switch panel will light. Pressing the top of the rocker switch activates the navigation lights.

  • Page 44: Electrical System Maintenance

    Electrical Systems Section 4 Keep the tops of any battery clean and dry. 4.4 Electrical System Dirt and water can conduct electricity from Maintenance one post to the other and can cause battery discharge or cause errant engine warnings. Keep the battery posts free of corrosion. DO DANGER NOT use wing nuts to attach battery cables.
  • Page 45 Section 4 Electrical Systems Operator Notes S 248 SPORT...

  • Page 46: Plumbing Systems

    Plumbing Systems Section 5 Plumbing System When properly primed and activated, the water system will operate like the water system in a home. An automatic pressure 5.1 Fresh Water System sensor keeps the system pressurized. If the system has been recently filled or has not (Optional) been used for an extended period, air may accumulate at the pump and the system...

  • Page 47: Livewell

    Section 5 Plumbing System Section 5 Plumbing Systems Close the livewell thru-hull ball valve when- equipped with a sea strainer on the intake ever livewell is not in use to prevent water side of the pump located in the aft bilge. from entering the livewell while the boat is Check it frequently and clean as necessary.

  • Page 48: Plumbing System Maintenance

    Exterior Drains water level rises above 2-3/4” from the Your Pursuit has two scupper drains located bottom of the boat. in the rear of the cockpit. The drain rails Current is supplied to the automatic...
  • Page 49 Section 5 Plumbing Systems Fresh Water System Raw Water System NOTICE CAUTION Turn the fresh water system switch If the raw water inlet hose ruptures, “OFF” when leaving the boat turn pump off immediately. Close the unattended or when the fresh water thru-hull valve.
  • Page 50 Plumbing Systems Section 5 Drainage Systems Perform these routine maintenance procedures to maintain your drainage system: • Clean the cockpit drain rails with a hose and water to remove all debris. • Clean the hardtop leg drain holes, especially before winter storage. •...
  • Page 51 Section 5 Plumbing Systems Operator Notes S 248 SPORT...

  • Page 52: Ventilation Systems

    Ventilation Systems Section 6 Ventilation System 6.1 Carbon Monoxide and Proper Ventilation Read "Carbon Monoxide" in the Safety Section. It contains important information on carbon monoxide and the carbon monoxide detector. 6.2 Bilge Compartment Ventilation Air flow into the bilge compartment is supplied by four vents on either side of the cockpit, under the gunwale boards.
  • Page 53 Section 6 Ventilation Systems Operator Notes S 248 SPORT...

  • Page 54: Exterior Equipment

    Exterior Equipment Section 7 Exterior Equipment Windlass (Optional) NOTICE 7.1 Deck CAUTION DO NOT use windlass as the only method of securing anchor in the bow roller. Secure anchor line to Unsecured open exterior doors a cleat or chain snubber before and/or hatches can slam closed trailering or operating your boat.

  • Page 55: Cockpit

    Swim Platform To deploy the ladder, unlatch the anchor Your Pursuit boat is equipped with port and locker hatch. Telescope the ladder out and starboard aft integrated boarding platforms. fold it over to the water. Close and secure Inspection deck plates are located in the the anchor locker hatch latch.
  • Page 56 Exterior Equipment Section 7 Transom Door Aft Foldout Bench Seat Do not use the transom door when the The aft folding bench seat is hinged and boat is in motion. DO NOT leave the opens to provide additional seating space. transom door unlatched.
  • Page 57 If you intend to add equipment or make modifications to the hardtop, contact Pursuit Customer Relations to make sure the equipment you would like to add or the intended modification will not void the...

  • Page 58: Interior Equipment

    Interior Equipment Section 8 Interior Equipment motor to flush. The motor is part of the selfcontained head. The head is connected to the pressurized fresh-water system. 8.1 Head Compartment Fresh water is used to reduce odor in the head compartment. The head compartment is equipped with a To use the head, make sure the ELECTRIC stainless-steel sink and a cold-water faucet.

  • Page 59: Audio System

    Section 8 Interior Equipment 8.2 Audio System Holding Tank Monitor tank level and have it pumped out Stereo (Optional) before it is completely full. If the tank is allowed to overfill, the waste will overflow The stereo is located in the helm station. out the tank vent and overboard.

  • Page 60: Safety Equipment

    You should also read the should it persist. See your Pursuit Dealer for book entitled "Sportfish, Cruisers, Yachts - necessary control and cable adjustments. Owner's Manual".

  • Page 61: Carbon Monoxide Hazards

    Section 9 Safety Equipment If the operator is thrown from the seat, or may turn red. A slight buildup of CO in the moves too far from the helm, the lanyard will human body over several hours causes disconnect the clip from the switch, shutting headache, nausea and other symptoms off the engine.
  • Page 62 CO gas, CO poisoning and operation instructions. Contact the detector manufacturer, the Pursuit Customer Relations Department or your local fire department for assistance in finding and correcting the situation. In certain situations, boats can have a problem due to the “station wagon effect”...

  • Page 63: First Aid

    Section 9 Safety Equipment Section 9 Safety Equipment Section 9 Safety Equipment program. We recommend that you contact the manufacturer of your CO detector and program. We recommend that you contact have it tested and recertified periodically. Many manufacturers of carbon monoxide the manufacturer of your CO detector and Certain electronic equipment have a limited have it tested and recertified periodically.

  • Page 64: Required Safety Equipment

    In many emergency situations, the Coast Visual Distress Signals Guard can provide assistance in obtaining All Pursuit boats used on coastal waters, medical advice for treatment of serious the Great Lakes, territorial seas, and those injuries or illness. If you are within VHF...
  • Page 65 Coast Guard 72 Electric Distress Light, night use only COLREGS standard. The fixtures used on your Pursuit meet the 72 COLREGS The electric distress light is accepted for standard for the length of your boat and night use only and must automatically flash visibility required.

  • Page 66: Additional Safety Equipment

    Safety Equipment Section 9 9.8 Additional Safety Equipment the “Federal Requirements and Safety Tips for Recreational Boats” pamphlet or contact Besides meeting the legal requirements, the U.S. Coast Guard Boating Safety Hot prudent boaters carry additional safety line, 1-800-368-5647. equipment. This is particularly important if For instructions on the proper maintenance you operate your boat offshore.
  • Page 67 Section 9 Safety Equipment Operator Notes S 248 SPORT...

  • Page 68: Operation

    Operation Section 10 Operation Passengers should be seated to properly balance the load and must not obstruct the operator's view, particularly to the front. 10.1 General Overloading and improper distribution of weight can cause the boat to become Before you start, become familiar with unstable and are significant causes of the various component systems and their accidents.

  • Page 69: Rules Of The Road

    Section 10 Section 10 Operation Operation Section 10 Operation petroleum facilities. Observe and avoid petroleum facilities. Observe and avoid • Observe and avoid all security zones. other restricted areas near dams, power other restricted areas near dams, power Avoid commercial port areas, plants, etc.

  • Page 70: Pre-Cruise Check

    Operation Section 10 Operation Section 10 Operation Section 10 Meeting Head-On Or Nearly-So Navigation Aids Meeting Head-On Or Nearly-So Navigation Aids Meeting Head-On Or Nearly-So Navigation Aids Situations Situations Situations Aids to navigation are placed along coasts Aids to navigation are placed along coasts Aids to navigation are placed along coasts and navigable waters as guides to mark safe When two motorboats are approaching each...

  • Page 71: Operating Your Boat

    Section 10 Operation Each person onboard must have at least q Needle Nose Pliers one personal flotation device onboard and q Wire Crimping Tool one throwable device. Check the U.S. q End Wrench Set Coast Guard standards for the correct type q Wire Connector Set required for your boat.
  • Page 72 Operation Section 10 REMEMBER: read the instructions given to you for your engines. When operating a boat, you accept the For more instructions on safety, equipment responsibility for the boat, safety of passengers and boat handling, enroll in one of the and others out enjoying the water.

  • Page 73: Fishing

    Section 10 Operation • If you are going to leave the boat boat are exaggerated in the tower and unattended for a long period of time, may become excessive in rough seas. put the battery main switches to “OFF” • Be careful when using the trim tabs and close all seacocks.

  • Page 74: Docking, Anchoring And Mooring

    Operation Section 10 10.8 Docking, Anchoring and and secure the boat as soon at it stops. Use fenders to protect the boat while it is Mooring docked. Keep the engines running until the lines are secured. Docking and Docklines Backing into a Slip Maneuvering a boat near a dock and Approach the slip with the stern against securing it requires skill and techniques that...

  • Page 75: Controls, Steering Or Propulsion System Failure

    Section 10 Operation are secured to the stern cleats and to mid WARNING ship pilings or cleats. The spring lines keep the boat from backing into the dock while allowing it to ride the tide. SINKING OR DROWNING HAZARD Anchoring at the stern can pull a boat under water.

  • Page 76: Collision

    If only one engine has failed, you can The mooring cleats or bow/stern eyes on operate on one engine. Do not to apply too Pursuit boats are not designed or intended much power to the running engine. When to be used for towing or lifting. These cleats...

  • Page 77: Transporting Your Boat

    If you trailer your boat, make sure your tow vehicle is capable of towing the weight Your Pursuit boat is a large boat and should of the trailer, boat and equipment and the only be trailered by professionals with the...

  • Page 78: Water Skiing

    Canvas enclosures 10.15 Water Skiing will be damaged, they are not designed to withstand the extreme Your Pursuit can be equipped for water skiing. wind pressure encountered while If you have never pulled skiers, you should trailering. Remove and properly store observe, learn and practice from an experienced enclosures before trailering.

  • Page 79: Man Overboard

    Section 10 Operation When a skier falls, be prepared to turn • Turn off the engines when person is the boat immediately and return to the alongside and use a ring buoy or a skier. Never leave a fallen skier alone boat cushion with a line attached, a in the water for any reason.

  • Page 80: Routine Maintenance

    Routine Maintenance Section 11 Routine Maintenance applied to prevent blistering or osmosis prior to applying antifouling paint. Because of variations in water temperature, marine 11.1 General growth and pollution in different regions, your dealer and/or a qualified boat yard in your area should be consulted when WARNING deciding what bottom paint system to apply to your hull, because pollution and marine...
  • Page 81 Section 11 Routine Maintenance Boats stored in saltwater will require anodes oxidation of the gel. This condition will be to be replaced at least every 6 months to more apparent with dark colors, which one year. Anodes requiring replacement require more frequent maintenance. A more frequently may indicate a stray heavier buffing is required to bring the current problem within the boat or at the...
  • Page 82 Use a effects of saltwater. The anodized aluminum good chrome cleaner and polish on all used on your Pursuit was coated with a chrome hardware. Clean and wax chrome metal protector called Aluma Guard at the prior to extended storage.

  • Page 83: Seats, Upholstery, Canvas And Enclosures

    For more recommendations for your specific • Inspect and tighten the mounting area, check with your local Pursuit dealer. screws attaching seat bases to boat. Avoid using fuels with alcohol additives. • Keep a light film of grease on manual Gasoline, extended with an alcohol blend, seat slides.
  • Page 84 Routine Maintenance Section 11 Vinyl Upholstery Canvas and Side Curtains The vinyl upholstery used on the exterior Acrylic canvas should be cleaned seats and bolsters and headliner in the periodically by using a mild soap and water. cabin should be cleaned with soap and Scrub lightly and rinse thoroughly to remove water periodically.

  • Page 85: Cabin Interior

    Section 11 Routine Maintenance 11.4 Cabin Interior Clean cabin interior just like you would clean a home interior. • Teak woodwork - use teak oil. • Carpeting - use a vacuum cleaner. • Vinyl headliner - clean as previously explained. 11.5 Bilge To keep the bilge clean and fresh, use a commercial bilge cleaner regularly.

  • Page 86: Seasonal Maintenance

    Seasonal Maintenance Section 12 Seasonal Maintenance Severe gelcoat cracking or more serious hull damage can occur during hauling and launching if pressure is created on the 12.1 Storage and Lay-up gunwales (sheer) by the slings. Use flat, wide slings and spreaders long enough to keep pressure from the gunwales.

  • Page 87: Winterizing

    Hull damage resulting from improper Fresh Water System cradle or trailer support is not covered by the Pursuit warranty. The entire fresh water system must be completely drained. Disconnect all hoses, Preparing The Boat For Storage: check valves, etc.
  • Page 88 Compartments in the bilge that will not drain Refer to generator’s owner’s manuals or completely should be pumped out and then contact a Pursuit dealer. sponged until completely free of water. Dry the hull bilge and self-bailing cockpit Marine Toilet troughs.

  • Page 89: Recommissioning

    Section 12 Seasonal Maintenance Clean the aluminum frame with soap DO NOT use the bimini top or convertible and water and dry thoroughly. Apply an top canvas in place of the winter storage aluminum metal protector to the entire frame cover.
  • Page 90 Seasonal Maintenance Section 12 After Launching: • Check all water systems and the engine mounting bolts for leaks. Operate each system one at a time and check for leaks and proper operation. • Check the bilge pump, manual and automatic switches. •...
  • Page 91 Section 12 Seasonal Maintenance Operator Notes 12-6 S 248 SPORT...

  • Page 92: Glossary Of Terms

    Glossary of Terms Section A Glossary of Terms Boat Hook: Short shaft of wood or metal with a hook fitting at one end shaped to aid in extending one’s reach from the side of the boat. In, near, or toward the stern of a boat. Bow: The front end of a boat’s hull.
  • Page 93 Section A Glossary of Terms Coaming: A vertical piece around the athom: A measure of depth. One edges of cockpit, hatches, etc. to stop water Fathom = 6 feet. on deck from running below. Fender: A soft object of rubber or plastic Cockpit: An open space, usually in the aft used to protect the topsides from scarring...
  • Page 94 Glossary of Terms Section A Length On The Waterline (l.w.l.): and Rail: Rail mounted on the boat, A length measurement of a boat at the for grabbing with your hand, to steady you waterline from the stern to where the hull while walking about the boat.
  • Page 95 Section A Glossary of Terms Pyrotechnic Distress Signals: Distress autical Mile: A unit of measure equal to signals that resemble the brilliant display of one minute of latitude. (6076 feet) flares or fireworks. Nun Buoy: A red or red-striped buoy of conical shape.
  • Page 96 Glossary of Terms Section A Shaft Log: Swimming Ladder: Pipe through which the Much the same as propeller shaft passes. the boarding ladder except that it extends down into the water. Sheer: The uppermost edge of the hull. Sling: affrail: A strap which will hold the boat Rail around the rear of the securely while being lifted, lowered, or...
  • Page 97 Section A Glossary of Terms Wharf: A structure generally parallel to the shore. Working Anchor: An anchor carried on a boat for most normal uses. Refers to the anchor used in typical anchoring situations. Windlass: A winch used to raise and lower the anchor.

  • Page 98: Maintenance Schedule

    Maintenance Schedule Appendix B Maintenance Schedule Section B Maintenance Schedule Each Semi- Maintenance Weekly Monthly Yearly Annually Nedeed Clean hull below the waterline Bottom paint Check sacrificial anodes Replace sacrificial anodes Wash boat canvas& hardware Wax exterior gelcoat Clean & protect hardware Polish &...

  • Page 99: Maintenance Log

    Appendix B Maintenance Log Section B Maintenance Log Maintenance Log Date Hours Dealer Service/Repairs C238 S 248 SPORT...
  • Page 100 Maintenance Log Appendix B Maintenance Log Section B Date Hours Dealer Service/Repairs C238 S 248 SPORT...
  • Page 101 Appendix B Maintenance Log Section B Maintenance Log Date Hours Dealer Service/Repairs C238 S 248 SPORT...

  • Page 102: Boating Accident Report

    Boating Accident Report Appendix C Boating Accident Report Section C Boating Accident Report C238 S 248 SPORT...
  • Page 103 Appendix C Boating Accident Report Section C Boating Accident Report C238 S 248 SPORT...

  • Page 104: Float Plan

    Float Plan Appendix D Float Plan Section D Float Plan C238 S 248 SPORT...
  • Page 105 Section D Float Plan Operator Notes S 248 SPORT...

  • Page 106: Troubleshooting Guide

    Troubleshooting Guide Appendix E Troubleshooting Guide Section E Troubleshooting Guide Problem Cause and Solution Control Systems • Steering system is low on fluid. Fill and bleed system. • Steering system has air in it. Fill and bleed system. Hydraulic Steering is slow to respond •...
  • Page 107 Appendix E Troubleshooting Guide Section E Troubleshooting Guide Problem Cause and Solution • Propeller may be damaged and need repair. • The propeller or propeller shaft is bent. Repair or replace damaged components. The boat vibrates at cruising speeds. • The running gear is fouled by marine growth or rope.
  • Page 108 Troubleshooting Guide Appendix E Troubleshooting Guide Section E Problem Cause and Solution • The engine may be having a problem with a sticky anti-siphon valve, located in the fuel line near the fuel tank, that is restricting the fuel flow. Remove & clean or replace the anti-siphon valve.
  • Page 109 Section E Troubleshooting Guide Operator Notes S 248 SPORT...

  • Page 110: Schematics

    Schematics Section F S 248 SPORT...
  • Page 111 Section F Schematics S 248 SPORT...
  • Page 112 Schematics Section F S 248 SPORT...
  • Page 113 Section F Schematics S 248 SPORT...
  • Page 114 Schematics Section F S 248 SPORT...
  • Page 115 Section F Schematics S 248 SPORT...
  • Page 116 Schematics Section F S 248 SPORT...
  • Page 117 Section F Schematics S 248 SPORT...
  • Page 118 Schematics Section F S 248 SPORT...
  • Page 119 Section F Schematics F-10 S 248 SPORT...
  • Page 120 Schematics Section F F-11 S 248 SPORT...
  • Page 121 Section F Schematics F-12 S 248 SPORT...
  • Page 122 Schematics Section F F-13 S 248 SPORT...
  • Page 123 Section F Schematics F-14 S 248 SPORT...
  • Page 124 Schematics Section F F-15 S 248 SPORT...
  • Page 125 Section F Schematics F-16 S 248 SPORT...
  • Page 126 Schematics Section F F-17 S 248 SPORT...
  • Page 127 Section F Schematics F-18 S 248 SPORT...
  • Page 128 Schematics Section F F-19 S 248 SPORT...
  • Page 129 Section F Schematics F-20 S 248 SPORT...
  • Page 130 Schematics Section F F-21 S 248 SPORT...
  • Page 131 Section F Schematics F-22 S 248 SPORT...
  • Page 132 Schematics Section F F-23 S 248 SPORT...
  • Page 133 Section F Schematics F-24 S 248 SPORT...

  • Page 134: Fresh Water System

    Fresh Water System Appendix G Fresh Water System Section G Fresh Water System The fresh water system must be disinfected before first use and yearly at the begin- ning of each season. A clean sanitized fresh water system will greatly reduce the risk of developing coliform bacteria or other disease-causing organisms (pathogens) and will help protect the health of everyone onboard.
  • Page 135 Appendix G Fresh Water System Section G Fresh Water System Ensure the water system, including the water heater and pump(s), is drained completely. Close all faucets. CAUTION Notify all persons aboard that the fresh water system is being sanitized. Do not allow anyone to drink from the fresh water system during the sanitizing process.
  • Page 136 Fresh Water System Appendix G Fresh Water System Section G Switch ON the FRESH WATER PUMP breaker(s). At each faucet, run about 1/2 gallon of water out of each tap (hot and cold), then close the tap. You should be able to smell chlorine out of each tap. Switch OFF the FRESH WATER PUMP breaker(s).
  • Page 137 Appendix G Fresh Water System Section G Fresh Water System The fresh water system is now commissioned and ready for use. To remove excessive chlorine taste or odor that might remain in the system, do the following: Ensure the water tank has enough available capacity to accept 10 additional gallons.

  • Page 138: Aquatic Invasive Species

    Aquatic Invasive Species Section H Aquatic Invasive Species Aquatic invasive species (AIS) are plants and animals that occur in waters in which they are not native and whose introduction causes or is likely to cause economic or environmental damage or harm to human health. AIS have a negative impact on the waterway, its native species, and recreational and commercial uses of the waterway.
  • Page 139 Appendix H Acuatic Invasive Species Section H Aquatic Invasive Species GENERAL CLEAN DRAIN DRY PROCEDURE GENERAL CLEAN DRAIN DRY PROCEDURE Clean, Drain, Dry… In every waterbody, every time. Clean, Drain, Dry… In every waterbody, every time. Preventing the spread of aquatic invasive species starts with you. A cooperative effort is Preventing the spread of aquatic invasive species starts with you.
  • Page 140 Aquatic Invasive Species Section H DISPOSE Dispose of unwanted bait, worms, and fish parts in the trash. When keeping live bait, drain bait container and replace with spring or dechlorinated tap water. Never dump live fish or other organisms from one water body into another. Together the three steps of Clean Drain Dry greatly minimizes the risk of spreading Aquatic Hitchhikers into new locations.
  • Page 141 Section H Aquatic Invasive Species Operator Notes S 248 SPORT...

This manual is also suitable for:

Dc 306 dual console 2024

Table of Contents