Related Manuals for OPT7 AURA ENGINE BAY
Summary of Contents for OPT7 AURA ENGINE BAY
- Page 1 ENGINE BAY INSTALLATION GUIDE COMPONENTS LIGHT STRIPS HAND HELD REMOTE ZIPTIES AURA CONTROL BOX HARDWIRE POWER HARNESS EXTENSION WIRES MOUNTING KIT...
- Page 2 INSTALLATION STEP 1 Decide where to locate the control box and light strips. Ensure wiring has enough length for light strips to be installed in desired location. EXAMPLES AUXILIARY WIRE EXTENSION WIRE FUSE Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!! Please ensure that the LED bars or strips/control box/wiring all are mounted WARNING...
- Page 3 INSTALLATION STEP 2 Secure Control box in desired location with Velcro or zipties. * CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture. STEP 3 Secure the light strips using the zip ties to tie all the wiring away from the moving components.
- Page 4 Compatible). BRIGHTNESS DISCLAIMER OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
Need help?
Do you have a question about the AURA ENGINE BAY and is the answer not in the manual?
Questions and answers