Subscribe to Our Youtube Channel
Related Manuals for MP Filtri FHM010
Summary of Contents for MP Filtri FHM010
- Page 1 HIGH PRESSURE FILTERS INSTALLATION, SERVICE AND MAINTENANCE MANUAL AND SAFETY INSTRUCTIONS INSTRUCTIONS FHM010 FHM010 PASSION PERFORM...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page Description General warnings Tools Handling Dimensional drawings Installation Commissioning Standard maintenance Filter element replacement Special maintenance Clogging indicator (or plug) replacement Seals replacement Instructions for use in explosive atmospheres Regulations Spare parts list Ordering code 13.1 Filter / Housing / Bowl 13.2 Filter element... -
Page 4: Description
- Connect the filter with an anti-loosening system and regularly check the condition of the connection - The declared performances and the safety of the product are only guaranteed when MP Filtri original spare parts are used - Warranty is only effective if MP Filtri original spare parts are used. -
Page 5: Handling
FHM010 Handling - The unit is shipped in a cardboard box with dimensions depending on the order - The handling must be carried out in accordance with the laws in force in the country of use of the product - Handle the product with care, avoid impacts - Store in a dry and frost-free room - The unit should be stored in a suitable location away from the production area when not in use. -
Page 6: Dimensional Drawings
Dimensional drawings FHM010 Connection G1 Filter length [mm] Connection for differential indicator T2 plug not included Recommended clearance space for maintenance Nr. 4 holes Mounting surface Mounting surface High Pressure filters... - Page 7 FHM010 FHM010 Connection G2 Filter length [mm] Connection for differential indicator T2 plug not included Recommended clearance space for maintenance Nr. 4 holes Mounting surface High Pressure filters...
-
Page 8: Installation
Parts identification FHM010 Installation Item Description Clogging indicator connection Identification plate Clogging indicator connection Identification plate - Check that the system working pressure does not exceed the maximum working pressure of the filter. The maximum working pressure of the filter is shown on the identification plate... -
Page 9: Standard Maintenance
FHM010 Standard maintenance FILTER ELEMENT REPLACEMENT The clogging indicator monitors the conditions of the filter element. The alarm signal shown by the differential indicator during the normal working conditions (pressure, temperatures …) means that the filter element needs to be replaced. -
Page 10: Special Maintenance
Special maintenance CLOGGING INDICATOR (OR PLUG) REPLACEMENT - Check the availability of the right spare parts by comparing the part numbers shown on them with that shown on the filter name plate or spare parts list Filtro Smontaggio Smontaggio Filtro Smontaggio Smontaggio completo... -
Page 11: Seals Replacement
Filtro FHM010 completo SEALS REPLACEMENT - Check the availability of the right spare parts by comparing the part numbers shown on them with that shown on the filter name plate or spare parts list - For the disassembly and the assembly of the parts, please refer to the tools table in paragraph 3 - Switch off the system - (Fig. -
Page 12: Instructions For Use In Explosive Atmospheres
MP FILTRI has carried out a voluntary certification of a part of the product range in compliance with directive 2014/34/EU, in order to guarantee an appropriate degree of safety in these particular conditions. -
Page 13: Spare Parts List
Spare parts list FHM010 FHM010 - FZM010 12. Spare parts list Item Quantity Description Designation / Ordering code Complete filter Housing See “Ordering Code” table Bowl Assembly Filter element Clogging indicator Item Q.ty Description Designation / ordering code Seals kit... -
Page 14: Ordering Code
Filtration rating (filter media) Inorganic microfiber 3 µm Inorganic microfiber 6 µm Inorganic microfiber 10 µm Inorganic microfiber 16 µm Inorganic microfiber 25 µm Wire mesh 25 µm Element ∆p 210 bar Execution MP Filtri standard Customized High Pressure filters... -
Page 15: Filter Element
Inorganic microfiber 25 µm M25 Wire mesh 25 µm Seals Element ∆p 210 bar Execution MP Filtri standard Customized CLOGGING INDICATORS Electrical differential indicator Electrical differential indicator Electrical / visual differential indicator Electrical / visual differential indicator Electrical differential indicator... -
Page 16: Troubleshooting
14. Troubleshooting 14.1 MISUSE OF THE PRODUCT This product should be connected to a hydraulic line; this must not exceed upper pressure limit of the product. his product should follow all standard operating procedures previously set at the operating location as well as the procedures required by the manufacturer. - Page 17 NOTES High Pressure filters...
- Page 18 NOTES High Pressure filters...
- Page 19 All data, details and words contained in this publication are provided for use by technically qualifi ed personnel at their discretion, without warranty of any kind. MP Filtri reserves the right to make modifi cations to the models and versions of the described products at any time for both technical and/or commercial reasons.
- Page 20 WORLDWIDE NETWORK CANADA CHINA FRANCE GERMANY INDIA SINGAPORE UNITED ARAB EMIRATES UNITED KINGDOM ITALY PASSION PERFORM mp ltri.com...
Need help?
Do you have a question about the FHM010 and is the answer not in the manual?
Questions and answers