Graco HYDRA-SPRAY EH 433 GT Instructions-Parts List Manual

INSTRUCTIONS-PARTS LIST
e
307-1 I 1
Rev V
ORPCO
SUPERSEDES
U
This manual contains IMPORTANT
WARNINGS end INSTRUCTIONS
READ AND RETAIN FOR REFERENCE
ELECTRIC-HYDRAULIC AIRLESS PAINT SPRAYER
EH 433 GT HYDRA-SPRAY"
3 0 0 0
psi (210 bad MAXIMUM WORKING PRESSURE
Provides 1 GPM at 1 0 0 0 PSI (70 bar)
Model 231-004. Series A
Basic Sprayer, with
60
Hz Motor, without hose, gun,
RAC Ill and spray tip
With 60
Hz
Motor. includes Model 231-004 S!xaver.
Model 226-433, Series M
hose, gun, RAC Ill and choice of spray tip
Model.226-432. Series K
With
50
Hz Motor, includes Sprayer, hose, gun,
RAC 111, and choice of spray tip
~ ~~~
. .
~~
INDEX
Warnings
.......................................................
2,3
Advertencia 6.7
Avertissement
4.5
Setup
..............................................................
8
Flushing Guidelines
.............................................
9
Operation
...................................................
.10,11
Maintenance..
..............................................
11.12
Service
.......................................................
13-17
Troubleshooting Guide
................................
13,14
Removing the Hydraulic Motor
........................
..15
Displacement Pump Disassembly
.....................
..15
Displacement Pump Reassembly
.....................
..16
Replacing the Electric Motor
...........................
..16
Replacing the Hydraulic Pump
...........................
17
Parts Drawing 18,19
Electric .Motor Wiring Diagram 17
Parts
List..
....................
I . .
...........................
.20,21
How to Order Replacement
Parts
..........................
21
Accessories
.................................................
22. 2 3
Technical Data
.....................................
Back Cover
.................................................
.....................................................
..........................
..............................................
Warranty..
...........................................
Back Cover
Aluminum and Zinc Material Hazard
WARNING
Never use 1.1.1-trichloroethene, methylene chloride, other halogenated hydrocarbon solvents or fluids containing
such solvents in this equipment. Such use could result in a serlous chemical reaction, with the possibility of explo-
sion, which could cause death, serious bodily injury and/or substantial property damage.
Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1444
@COPYRIGHT 1973, GRACO INC.